Location: NYS
Posts: 2,511
My VIN: 4519
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
I decided I might as well do all of the trim, including the windshield finisher thingies. Just got more frog tape today so I can finish masking the car tomorrow and maybe get the paint on.
Last edited by Lwanmtr; 04-19-2016 at 10:36 PM.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Virginia Beach, Virginia
Posts: 17
My VIN: 905
If you have not worked out the front spoiler bolt problem, I can share what I did. The lower rear facia bolts are the same, but they need to be imbedded in the spoiler. I very carefully cut out the rectangular base of the bolts with a hot knife/soldering iron. I went from above but it would probably work from below. You have to remove the bolt with it's rectangular base. The base of the new bolts are a slightly different size. Then I epoxied in the new bolt. It seems to work well, but I have not installed it on the car yet
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Yeah, Gonna have them do all that up at DMCNW when I get my car up there for the big job...hehe. Im not totally confident in my abilities to do that sorta thing.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Finished masking the car for part one of the trim painting. Painted the gills, side trim and rocker panels.
Masked.jpgPainted.jpg
All those years of wrapping presents really came in handy...lol
Tomorrow Ill sand and paint the windshield trim.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Just a few updates...
Masked off the front windsheild and surrounding bits...
20160421_164718.jpg
Here's the trim, gills and windsheild trim all painted up...
20160423_152350.jpg20160423_152413.jpg
Also got a complete set of new exterior screws and gaskets for the maker lights, so I put them in...they look nice with the spiffy LEDs in there.
20160501_163815.jpg
Still need to sort out the rear fascia before I can put that end back together
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: NYS
Posts: 2,511
My VIN: 4519
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
Very good job so far
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Thanks.....maybe one day I'll be able to drive it...lol
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Got a nice set of gently used headliners.
Headliner1.jpgHeadliner2.jpg
I see the front t panel slips into the bracket and is secured at the front by the sunvisors? How is the rear secured (other than the bracket)?
I think Im gonna have to find sunvisors...and get the retaining plates put back in...PO i guess didnt realize you have to unscrew them and just pulled them out.
I also got some courtesy lights. Not pic though..hehe.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon