Cool. Thanks for the info.
Cool. Thanks for the info.
Dana
1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
1985 Chevrolet Corvette, Z51, 4+3 manual
2006 Dodge Magnum R/T (D/D)
2010 Camaro SS (Transformers Edition)
Posts: 166
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Today I spent some time (prolly more than it shoulda took) putting in the new rubber links on the coolant pipe on the driver side. I might need to move one a little more to make sure I get a good seal. Was a pain to try and wiggle the front part and the hose to get it over the pipe...basically because i could only get one arm in there at a time..so I had to reach under the frame with one and the other up in there...and Im sure I used muscles in angles they really otta not be...lol
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Today I started on the modifications to the front turn light wiring, adding in the connectors to plug the halos on my headlights. Used old style hard drive connectors since they have the same guage wire and are pretty durable.
Turnlights.jpg
Will have to do the ends on the lights themselves next, which will be a pain since i'll have to do it on the car.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Wow..its been almost a year and a half....well....on to the good stuff...
Finally able to get back on things in a good way... I got a bunch of parts from Toby up at DMCNW..heres a list....
EZ Oil Drain Valve Kit
Wings B Cool Adjustable Fan Switch
Wings B Cool Self Bleeder Kit
Front Sway Bar Combo
Wings A Light 3rd Brake
License plate lamp
Fuse Box
Vent Door
Armrest Rt
Inner Wipe Seal LH
Outer Wipe Seal LH
Weatherstripping
Door Handles
Stickers 1981
Boot Kit
Drop Glass LH
Air Deflector RH
Deflector Retaining
There are a few other parts that he's waiting to arrive before he sends them on down.
And for those that like pictures....
Parts-ArmRest.jpgParts-BootHandlesFuseBox.jpgParts-BrakeOilSwayBarBleeder.jpgParts-Rubber.jpgParts-Sheild.jpg
I'll have to figure out all the rubber bits and will have to have the upper door seals put in by Toby, since I dont want to risk the door or torsion bar.
Still have a few things I'll need to get from DMCH, since Toby is no longer an official vendor and cant get some parts. Like the door locks and seat covers.
And I even put some of them on the car...the buffer strips for the louvre (ok, I think thats what they were for, cause they fit nicely).
Parts-Buffers.jpg
Toby also fixed the holes for the running lights on my front fascia and drilled holes in the spoiler so I can actually attach it again.
Stay tuned for more stuffs.....
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Back in it. Nice!
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Not looking forward to putting the new fuse box in..lol
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Well, since my last post Ive made a lil progress...
I installed new door locks that I got keyed from DMCH
Installed new metal door handles
Finished my custom wiring on the running light / headlight halos
Also finished stripping all the old stuff off the binnacle, so that when Toby finds a new place I can get it recovered. I also cleaned it off and put some rusty metal primer on it to protect it a bit.
Binnacle-1.jpgBinnacle-2.jpgBinnacle-3.jpg
And I worked on straightening the eyebrows. I used a heat gun to soften and push the brows down a bit, and clamped some wood over them to allow the pressure to help it relax as it cools. Finally I got a bar of aluminum and cut it to 18in pieces, carefully bent those to match the curve of the fascia as much as I could, then, being quite generous with the glue I put the bars in and clamped them in to set and harden for a couple days. I used JB Weld, which comes in a 2 part syringe, but you can buy a pack of mixing nozzles that just pop on (yaay...no mixing)...Now that I've used glue, I can now put my car in the model kit category...lol
FaciaBrows-1.jpgFaciaBrows-2.jpgFaciaBrows-3.jpgFaciaBrows-4.jpg
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Today, after almost 4 years, the front fascia is back on the car
FasciaOn-1.jpg
I also primed and painted the rockscreen, and started to clean all the years of crud off the rh deflector I got from Toby.
Deflector1.jpg
I still need to get some longer screws for the front running lights..the ones I have are just a little short. Will be a trip to ace hardware.
Tomorrow I plan to put the hood on the sawhorses and fix the hanging carpet bits and rubber seal.
Yeah, procrastinatiing on doing the fuse box....free ice cream for someone to come do it...hehe.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon