On a few projects ago, I had a similar issue. I tackled it by clamping down the back end of the nut with Vise Grips/ pliers and drilled out the head from the top. Clean deal and no damage.
On a few projects ago, I had a similar issue. I tackled it by clamping down the back end of the nut with Vise Grips/ pliers and drilled out the head from the top. Clean deal and no damage.
Last edited by skill; 10-03-2015 at 06:20 PM.
¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬
2014 La Jolla Concours D'Elegance Volunteer
1998 Online Gamer; Everquest, AOE, R6, WOW, SOF
1981 DeLorean, Grey, Automatic, Flap, 12k preserved miles
1960 Volkswagen Beetle
1961 Cadillac Coupe DeVille - *Restoration in Progress*
I thought I'd report back. I was able to remove the 2 rivnuts from the lower radiator shroud today...
Before:
image.jpg
Cut away:
image.jpg
Poked into the inner cavity:
image.jpg
Actually there was a hole straight thorough the inner foam to the relief cavity for the front indicator lights so I was able to poke them all the way and remove them as I also have the whole front end off currently.....
image.jpg
Thanks again for the tips on doing this job.
Dana
1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
1985 Chevrolet Corvette, Z51, 4+3 manual
2006 Dodge Magnum R/T (D/D)
2010 Camaro SS (Transformers Edition)