I just purchased a DeLorean and after starting restoration on it have noticed a few things that don't seem correct. I consulted the wiring diagram, but I couldn't find most of the wires. Hopefully someone can shed light on some of these problems or just post some images that I could use for reference.
20151004_135047.jpg
- The pin in the top left circle has no wire connected to it. Is it supposed to be like this?
- The other circle has a wire that seems out of place. Is it correct?
20151004_135151.jpg
- In the red circle, there are three brown wires connected to one terminal on this circuit breaker. This seems correct, but I just want to make sure.
- In the black circle, the brown wire from the circuit breaker is spliced to a red/black wire on the starter relay. This doesn't seem correct, is it some sort of improvement?
20151004_135213.jpg
In the red circle, the cooling fan circuit breaker has no wires connected to it which doesn't seem right at all.
20151004_135245.jpg
I think the fan fail module is correct although I have seen other images where there are inline fuses connected to it. Is it wired wrong?
20151004_135437.jpg
I found this under the driver side dash, it seems that the PO cut off the black and black/purple wire to this melted connector. The other wires are brown/white and are connected together. Can someone identify this?