Clutch alignment tool

[dblincoln3]

Does anybody have a part number or the dimensions for a clutch alignment tool?

[PJ Grady Inc.]

Does anybody have a part number or the dimensions for a clutch alignment tool?

We the tool made from aluminum years ago and still have stock. The part # is 102512AT and sell for $14.95.
Rob

[dn010]

I can send you one to borrow if you want, or keep if I can find my second one. PM me if you're interested.

[David T]

Most auto stores sell plastic ones. Find one that fits.

[DMCMW Dave]

Clutchtools.com item #44

[dblincoln3]

Thank you Dave.

Clutchtools.com item #44

[Nicholas R]

Most auto stores sell plastic ones. Find one that fits.

I would be very impressed if you found a Renault clutch tool at a local parts store. The 24mm x 21T spline pattern is very unique. Even Renault barely used it. The only other company to briefly use the pattern was Toyota, however; don't be fooled, the spline pressure angle is not the same on the Toyotas as it is for the Renaults.

I have the plastic one DMCMW Dave mentioned; it works well.

[David T]

I would be very impressed if you found a Renault clutch tool at a local parts store. The 24mm x 21T spline pattern is very unique. Even Renault barely used it. The only other company to briefly use the pattern was Toyota, however; don't be fooled, the spline pressure angle is not the same on the Toyotas as it is for the Renaults.

I have the plastic one DMCMW Dave mentioned; it works well.

You don't need the splines, it just has to fit internally. A very easy job for anyone with a lathe. There are metric kits too made of plastic or you make one out of a damaged input shaft (if you can find one!).