FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 8 of 8

Thread: Removing covers

  1. #1
    Member Antileon's Avatar
    Join Date:  Oct 2015

    Location:  Denmark

    Posts:    39

    Removing covers

    Are there any challenges in removing the 2 plates covering the underside of the car. Is it required to remove , support or consider other parts, structures. ?
    I wish to take care of some surface rust and rather than working under the car it would make sense to take them off and clean them properly.
    Thanks
    5707

  2. #2
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,457

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)

    If you're talking about parts #:106733 & #:106734 :
    https://store.delorean.com/c-314-8-5...or-plates.aspx
    Then, you only have 3 bolts to remove each of them.
    Into the battery compartment and into the small luggage compartment behind the driver's seat.

  3. #3
    Member Antileon's Avatar
    Join Date:  Oct 2015

    Location:  Denmark

    Posts:    39

    Quote Originally Posted by Domi View Post
    If you're talking about parts #:106733 & #:106734 :
    https://store.delorean.com/c-314-8-5...or-plates.aspx
    Then, you only have 3 bolts to remove each of them.
    Into the battery compartment and into the small luggage compartment behind the driver's seat.
    I mean the 2 large triangular plates bolted to the underside of the chassis covering tank ect.
    sorry for being unclear.

  4. #4
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,457

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)

    I think that the ones I posted above?
    https://store.delorean.com/p-9738-ai...-plate-lh.aspx

  5. #5
    Member Antileon's Avatar
    Join Date:  Oct 2015

    Location:  Denmark

    Posts:    39

    Quote Originally Posted by Domi View Post
    I think that the ones I posted above?
    https://store.delorean.com/p-9738-ai...-plate-lh.aspx
    Its part 101716

  6. #6
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,457

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)

    The fuel tank plate:
    https://store.delorean.com/c-305-8-1-0-frame.aspx
    But that's only one plate.
    You have to unbolt the 16 bolts to remove the plate, that's all.

  7. #7
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,385

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    You get to find all the treasures dropped down there over the past 35 years. I found a dime from 1969. Yay.
    Dave

    Here, somewhere.


  8. #8
    Member Antileon's Avatar
    Join Date:  Oct 2015

    Location:  Denmark

    Posts:    39

    Quote Originally Posted by sdg3205 View Post
    You get to find all the treasures dropped down there over the past 35 years. I found a dime from 1969. Yay.
    LOL, as long as I do not find rust, I am happy

    Thanks from the cold Denmark

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •