Results 1 to 2 of 2

Thread: AN6 fuel line from the filter

  1. #1
    Senior Member BABIS's Avatar
    Join Date:  Sep 2012

    Posts:    475

    My VIN:    4502

    AN6 fuel line from the filter

    Hello guys,

    in the next future I want to upgrade the current rubber hoses I have mounted to braided AN6 fuel lines. I have a couple of questions about them:

    - from the fuel filter is better to mount a "AN6 Male to 12mm x 1.5 Male" adaptor with a "AN6 Hose Ends, 90 Degree Bend" or a "AN6 male on 12mm banjo fitting" mouted with a hollow bolt? Right now I don't remember if there is enough space over the fuel filter to mount the first option..

    - stock rigid return line: will work the "AN-6 to AN-5 union reducer" ? I know a couple of members here have already mounted it

    Best regards
    VIN 4502

  2. #2
    Senior Member AdmiralSenn's Avatar
    Join Date:  May 2011

    Posts:    439

    I used a 90 degree bend with no issues. You may have to slide the filter down a little depending on exactly where your bracket is mounted but there was plenty of room on mine.
    Aka Adam S, aka Adam Wright
    1981 DMC-12 #3416, mothballed in preparation for motor swap
    2006 Volvo S60R

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts