With the weather being cold in Hosuton (50+ degrees) my car is hard/impossible to start. I think I am making progress though. I made a few changes to the Tuner Studio program by increasing the Priming Pulse. I was able to get the car started. I'm wondering is I should increase it a little more or tweak another setting.

I'm thinking i still need to change settings in the Cranking Settings. When I had the car tuned at a Dyno shop they had Cranking RPM at 500. I read up on this and decided to move it down to 300. I have no TPS but it's set at 90 in the Flood Clear %. Should I set that at 0 or 100? For Cranking Fuel Pulse Rate I read that it's good to have it on alternate when dealing with engines that have higher number of cylinders. My car only has 6 so should my setting be at Every Event or Alternating Events?

Attached is my tune and log.

2016-01-01 Delorean.msq

2016-01-01_11.32.54.msl