Hi guys,
My brake light switch has been a bit problematic. At first it was just stuck, and a little WD40 seemed to fix the issue. I noticed the other night my brake lights weren't working again, and so checked the fuse first. It looked fine, but there's a 15 amp vs. 30 (or should it be 20?). So I checked the switch and the plunger was stuck. So I wd40'd it again, and I could see it sparking inside the case, but it on,y did that a few times then stopped.
So I'm guessing it's time for a new switch.
Does Radio Shack have an equivalent, and I'm guessing it's held in with a nut on the plunger side.
Thanks,
Greg