FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 17 of 17 FirstFirst ... 7 15 16 17
Results 161 to 170 of 170

Thread: Reassembling 4728...need assistance.

  1. #161
    Senior Member
    Join Date:  Nov 2013

    Location:  NYS

    Posts:    2,511

    My VIN:    4519

    Quote Originally Posted by FABombjoy View Post
    4 SEASONS A/C ACCUMULATOR #33191 '87 SKYHAWK FIRENZA SUNBIRD

    IIRC Andrew dug this xover up. I have one on my car too. Perfect fit and cheaper than a craft beer 6er.

    AHA! So it IS a GM part...

    Thanks Luke!

  2. #162
    Senior Member
    Join Date:  Nov 2013

    Location:  NYS

    Posts:    2,511

    My VIN:    4519

    Weird charging issue

    Tonight I reinstalled my binnacle and my battery light stayed on. I thought it might be a connector, but then when the fans came on the battery light went out and it started charging.

    Anybody familiar with this type of issue?

  3. #163
    Senior Member
    Join Date:  Nov 2013

    Location:  NYS

    Posts:    2,511

    My VIN:    4519

    Quote Originally Posted by Rich_NYS View Post
    Tonight I reinstalled my binnacle and my battery light stayed on. I thought it might be a connector, but then when the fans came on the battery light went out and it started charging.

    Anybody familiar with this type of issue?
    Might be a bad battery....gonna change that first.

  4. #164
    Senior Member
    Join Date:  Nov 2013

    Location:  NYS

    Posts:    2,511

    My VIN:    4519

    1/2 mile from my house my clutch pedal went to the floor....feels like it's not connected to anything. Fluid level is A-OK.

  5. #165
    Certified Stainless!! Chris Burns's Avatar
    Join Date:  May 2011

    Location:  Fernandina Beach Fl

    Posts:    1,928

    My VIN:    Getting closer and closer...

    Club(s):   (DCF)

    Sounds like a bad master cylinder or bad slave cylinder.

  6. #166
    Senior Member
    Join Date:  Nov 2013

    Location:  NYS

    Posts:    2,511

    My VIN:    4519

    Quote Originally Posted by Chris Burns View Post
    Sounds like a bad master cylinder or bad slave cylinder.
    I was thinking that, although my master is :newly rebuilt" and the slave is "new." Maybe I screwed up the rebuild...

  7. #167
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,026

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    Quote Originally Posted by Rich_NYS View Post
    Might be a bad battery....gonna change that first.
    No, bad batteries don't hold a charge.
    Clearly you have a good battery if it spun the engine to start it.

    The light staying ON means the alternator was not charging. How old is how old is the alternator? What was the Volt gauge showing when the engine was running while the batt light was ON?


    Sent from my iPhone using Tapatalk
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  8. #168
    Senior Member
    Join Date:  Nov 2013

    Location:  NYS

    Posts:    2,511

    My VIN:    4519

    Quote Originally Posted by DMC5180 View Post
    No, bad batteries don't hold a charge.
    Clearly you have a good battery if it spun the engine to start it.

    The light staying ON means the alternator was not charging. How old is how old is the alternator? What was the Volt gauge showing when the engine was running while the batt light was ON?


    Sent from my iPhone using Tapatalk
    Volt gauge was showing 12V at first, then 13.5V (with the battery light on.)

    The alternator was a month-old rebuilt. It tested bad, I got a warranty replacement and all is well again....

  9. #169
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,026

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    Quote Originally Posted by Rich_NYS View Post
    Volt gauge was showing 12V at first, then 13.5V (with the battery light on.)

    The alternator was a month-old rebuilt. It tested bad, I got a warranty replacement and all is well again....
    Great, was it a locally sourced alternator or the DMCH version of the CS130?


    Sent from my iPhone using Tapatalk
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  10. #170
    Senior Member
    Join Date:  Nov 2013

    Location:  NYS

    Posts:    2,511

    My VIN:    4519

    Quote Originally Posted by DMC5180 View Post
    Great, was it a locally sourced alternator or the DMCH version of the CS130?


    Sent from my iPhone using Tapatalk
    Locally sourced Saturn alternator.

Page 17 of 17 FirstFirst ... 7 15 16 17

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •