My order came in from PJ Grady the day I left for vacation. I was going to wait a day or two since the 8 hours of driving yesterday takes it out of me. But I decided to start installing the parts. I used the stock looking seal from Grady which was easy to press in since I could do it on my press with the adjusting ring removed. I could install the adjusting ring the full amount it was set at just with my fingers. I ended up setting it three notches tighter then it was set at. I think there still is a little side to side play but it's nothing like it was. I bolted the new axle in place and decided to take a break for the day.
I just have to torque the axle bolts (30 ft/lbs) and fill the transmission with a gallon of new oil.