Location: Pensacola, FL
Posts: 125
My VIN: 2543
I got the powder coated one from DMC a couple years ago. Well I just took my fascias off for a repaint and that rock screen looked like hell. Bent up and rusty. Their website says the stainless one is discontinued due to low sales. I actually don't like the shiny look, but rusty is worse. Anyone know where to pick up a stainless one?
Ben B. | VIN 2543 | 2017 Alfa Romeo Giulia
Location: Florida: Pinellas County
Posts: 2,110
My VIN: 5003 Never placed Concourse
Club(s): (DCF)
Originally Posted by BigBenb84
These screens are around, did you try calling Rob Grady or other vendors?
-----Dan B.
Posts: 88
My VIN: 2729
Delorean Industries sells them for $200, just ordered one and waiting for it to arrive. http://www.deloreanindustries.com/ro...een-stainless/
Location: Pensacola, FL
Posts: 125
My VIN: 2543
I checked on Rob's site since I remember him having them a while back but they aren't on there now. I haven't gone the calling route, that's next. Kinda putting out a feeler for a used one $$
Ah, thanks. I'll take a look.
PS..how long have you been waiting?
Ben B. | VIN 2543 | 2017 Alfa Romeo Giulia
Location: Florida: Pinellas County
Posts: 2,110
My VIN: 5003 Never placed Concourse
Club(s): (DCF)
You have to call Rob, not rely on the site. Going used is great, but I'd doubt there are any out there laying around.
Good luck!
-----Dan B.
Location: Champaign, IL
Posts: 142
My VIN: 10722
Hopefully a vendor is reading this post and will bring a few (SS and black painted SS) to the DCS. I'll buy one!
Andy
Location: Sacramento, CA
Posts: 637
My VIN: 2567 (Sold)
image.jpg
Other option: Cost me less than $30 for this eBay wire mesh
Location: Donegal, Ireland
Posts: 117
My VIN: 1569
Club(s): (DOI)
Rob told me at Eurofest he has stainless rock screens
Location: Champaign, IL
Posts: 142
My VIN: 10722
Is this what you bought: http://www.ebay.com/itm/Universal-Bl...5VU8L0&vxp=mtr
Andy
Location: Sacramento, CA
Posts: 637
My VIN: 2567 (Sold)
This one. http://www.ebay.com/itm/321929705283
Actually, it was only $11 for 40x13 mesh grill. For $11, I was willing to experiment and it worked.
I wish it was 42in wide. Not enough material to mount sides but still looked fine and stay mounted.
You only need a half so if you mess things up, you can redo or give a left over to your friend.
Shipping took several weeks from China.
Last edited by Ryan S.; 06-20-2016 at 07:27 PM.
Posting Permissions
Reply With Quote