FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 4 of 4

Thread: Adjustable WUR/CPR, Single piece speedo cable, ballast resistor

  1. #1
    '82 T3 FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    1,168

    My VIN:    10270

    Adjustable WUR/CPR, Single piece speedo cable, ballast resistor

    PM if interested in anything, please include ZIP or country for shipping price and if you want fast or slow shipping. I take Paypal and will ship anywhere.

    OEM used ballast resistor: $10
    Don't have a pic at the moment but can take one later

    Upper speedo cable: $10
    Don't have a pic at the moment but can take one later

    Special T Auto single piece speedo cable: $30
    Used for a few years / few thousand miles. This version is greaseable, not sure if the current version is.
    I don't have a firewall grommet and the rubber jacket is worn where it rubbed against the fiberglass, but the metal jacket is fine and undamaged. A layer of heat shrink tubing would clean it right up. I may do this preemptively if I can find my heat shrink

    Adjustable WUR/CPR: $200
    This WUR has been modified for both overall adjustment and cold adjustment. Note the screw/nut combo by the electrical plug.
    Pictures of the modifications are also on my website.
    The bottom cap has also been opened for adjustment and resealed. Cold pressure was verified this January on a 10 degree day.
    This WUR is 100% functional with spot-on book pressures (cold, warm, vacuum).
    Could use a little cleaning but that's about it!
    Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection

  2. #2
    '82 T3 FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    1,168

    My VIN:    10270

    Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection

  3. #3
    Junior Member
    Join Date:  Jul 2011

    Posts:    14

    My VIN:    5191

    PM sent for the WUR

  4. #4
    '82 T3 FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    1,168

    My VIN:    10270

    Adding: Steering Shaft Assembly

    WUR has been sold!

    New:
    Steering Shaft Assembly, Stainless
    Ordered from Delorean Parts Northwest, part K1026DP
    Great condition, no issues
    Price: $200
    Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •