Finally getting around to putting a carb on my Volvo. Coolant distribution pipe doesn't appear to have ever been removed (all hoses under the intake were marked "Volvo"). Despite using a 3/8 impact gun, one of the bolts snapped off:

BrokenBolt.jpg

5/16" nut fits a 7mm bolt shank perfectly:

516Nut.jpg

Welding blanket for protection (I use flux wire, which throws a lot of sparks. On the plus side it doesn't care about coolant all over the place, or being outside):

WeldingBlanket.jpg

Nut welded on:

NutWelded.jpg

Broken bolt removed. I just turned it out with a flat wrench. Obviously heat from the welding broke it free:

BoltRemoved.jpg

Bill Robertson
#5939