Quote Originally Posted by Josh View Post
the 3.0 is an easy mechanical swap, bolts in like the stock PRV
Only if you swap out lower engine castings (which requires unbolting the main bearings -- bearing caps are bolted through the lower casting). Rather than do that, Farrar will leave the 3.0 lower casting in place and mount it to a pair of engine cradle extensions like mine.

Note that 3.0 motor mounts bosses are shaped differently than DeLorean motor mounts (much shallower angle). DeLorean motor mounts have a big protrusion inside to compensate for their steeper boss angle. To use a 3.0 lower casting you need 3.0 motor mounts to go with it (big protrusion inside DeLorean motor mounts, combined with the shallower boss angle, lays the motor mount almost flat).

Bill Robertson
#5939