FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Radio Connector
Im wondering if anyone has the connector with wires from the old Alpine stereo that was in these? I sold my radio, cause it was in good condition and plan to put something new in and figured if I can find one of those it will make installing something new a bit easier.
Thanks
-
Senior Member
I think you mean the Craig unit, not Alpine. I have an extra OEM harness that includes the plug; however, the plug is cracked so I got another one from DMCH. I'll give you my cracked one for the price of postage but you might be best ordering here: http://store.delorean.com/p-7264-harness-radio.aspx
This part is dirt cheap, assuming that's what you need.
-
Actually, I had an Alpine in mine, not Craig...I think I still have the picture of it somewhere.
That part looks like the bits attached to the car...I'm looking for the end that would be attached to the radio.
-
Senior Member
Originally Posted by
Lwanmtr
Actually, I had an Alpine in mine, not Craig...I think I still have the picture of it somewhere.
That part looks like the bits attached to the car...I'm looking for the end that would be attached to the radio.
I see. Well nevermind then. These cars came from the factory with a Craig unit (ASI on the later models). Anything past that would have been done after-market. Good luck!
-
None of the wires inside look like they were messed with, so the connector may be the same.
-
The 9 pin radio pin is easy to find. I had the same problem http://dmctalk.org/showthread.php?13...Pin-Radio-Plug.
Just Google for Kubota RTV 9 Pin Radio Tractor Plug.
Pascal
-
I got a radio connector, so when I finally get one, it wont be a pain to attach.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules