FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 2 of 2 FirstFirst 1 2
Results 11 to 17 of 17

Thread: Contact info for Delorean upgrade parts ? Byrne H ?

  1. #11
    Bad Apple Lou and "Boo"'s Avatar
    Join Date:  Sep 2011

    Posts:    531

    My VIN:    5835

    Club(s):   (LINY-DMC) (DCUK)

    Quote Originally Posted by Delorean Industries View Post
    Louis I have seen a car with this done before. The factory brackets were mounted to the plastic body with self tapping screws. It appeared to be attached to window first, hung in place and mounted to lower bracket. There didn't seem to be a procedure out of car for bracket mounting as they were mounted at weird angles with self tapping holes that "didn't work". We ended to replacing both for the customer as it was banging into the outer skin when travel maxed up/down.
    Josh, thank you so much for the information. It was much more than I have been getting from the seller. I will be seeking a return and refund from Byrne. I just want to see if he can send me any mounting information at all first.

    Are $500 A-1 motors truly the best option?
    Lou and "Boo"- The man you love to hate.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "Boo" VIN 5835
    Born October 1981 - Brought back to life December 2011
    "Fastest naturally aspirated PRV" Delorean
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "Blue" - 1985 Fiero GT
    3800sc series 2

  2. #12
    Senior Member - Owner since 2003 Patrick C's Avatar
    Join Date:  May 2011

    Location:  Northern Michigan

    Posts:    1,147

    My VIN:    1880

    Club(s):   (DCO) (DCUK)

    Quote Originally Posted by Lou and "Boo" View Post

    Are $500 A-1 motors truly the best option?
    Yes
    Patrick C.
    VIN 1880

  3. #13
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,385

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    Quote Originally Posted by Lou and "Boo" View Post
    Josh, thank you so much for the information. It was much more than I have been getting from the seller. I will be seeking a return and refund from Byrne. I just want to see if he can send me any mounting information at all first.

    Are $500 A-1 motors truly the best option?
    There was a time when I was told over the phone by the guys at A1 to mention you got their info off this forum to get a discount. Not sure if that still applies, but its worth a shot.
    Dave

    Here, somewhere.


  4. #14
    Bad Apple Lou and "Boo"'s Avatar
    Join Date:  Sep 2011

    Posts:    531

    My VIN:    5835

    Club(s):   (LINY-DMC) (DCUK)

    Got in touch with Byrne
    And sent his motors back, he said he would refund me in full
    Lou and "Boo"- The man you love to hate.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "Boo" VIN 5835
    Born October 1981 - Brought back to life December 2011
    "Fastest naturally aspirated PRV" Delorean
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "Blue" - 1985 Fiero GT
    3800sc series 2

  5. #15
    Bad Apple Lou and "Boo"'s Avatar
    Join Date:  Sep 2011

    Posts:    531

    My VIN:    5835

    Club(s):   (LINY-DMC) (DCUK)

    Received a check from Byrne today for the original cost plus shipping.

    Very pleased with the return and Byrne's promptness to send the refund.
    Lou and "Boo"- The man you love to hate.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "Boo" VIN 5835
    Born October 1981 - Brought back to life December 2011
    "Fastest naturally aspirated PRV" Delorean
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "Blue" - 1985 Fiero GT
    3800sc series 2

  6. #16
    Junior Member Dmcfan1981's Avatar
    Join Date:  May 2011

    Location:  Eureka, CA

    Posts:    17

    My VIN:    4573

    Sorry to resurrect a dead thread but I recently ordered Lower Control Arms from deloreanupgradeparts and got an email saying my order was received...this was a few days ago, no email saying it was shipped. Kind of in the dark here and there is no contact information on the website!

  7. #17
    Senior Member Dangermouse's Avatar
    Join Date:  May 2011

    Location:  Atlanta OTP GA

    Posts:    7,084

    My VIN:    2743

    Club(s):   (SEDOC) (DCH) (DCUK) (DOC-UK)

    I wouldn't hold my breath if I was you.

    http://dmctalk.org/showthread.php?15...303#post218303
    Dermot
    VIN 2743, B/A, Frame 2227, engine 2320

    I don't always drive cars, but when I do, I prefer DeLoreans

    http://www.will-to-live.org

    No-one is to stone anyone, even, and I want to make this absolutely clear, even if they do say "carburetor"

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •