Results 1 to 4 of 4

Thread: Angle drive assistance requested

  1. #1
    Senior Member mr_maxime's Avatar
    Join Date:  Apr 2015

    Posts:    828

    My VIN:    10201

    Angle drive assistance requested

    I'll be in metro Atlanta this weekend and I was wondering if anybody could help me out changing my angle drive. I mostly just want some assistance with jacking the car properly. I'm only used lifts before and after seeing my neighbors car fall after his jack slipped I'm way more cautious especially with the Delorean's fiberglass body.

    Otherwise I was planning on jacking the front frame using a 2x4 for protection then slipping cinder blocks under the body to keep it stable. I know that jack stands can damage the fiberglass.

  2. #2
    Member
    Join Date:  Jun 2016

    Location:  Austin MN

    Posts:    67

    My VIN:    03500

    There is a good video on YouTube. This helped me with mine. I had to destroy the original to get the retention ring holding the nut on. If you're good with pickes you don't have to do. But I did mine with 1 jack on car and 1 jack for wrench and being very careful.

    Dave B.
    Last edited by WHO1DMC; 09-23-2016 at 12:46 PM.

  3. #3
    Senior Member mr_maxime's Avatar
    Join Date:  Apr 2015

    Posts:    828

    My VIN:    10201

    I already have the angle drive attached to a new nut. I've nearly changed it out before only to find out I lost the angle drive so I'm familiar with the procedure

  4. #4
    Senior Member mr_maxime's Avatar
    Join Date:  Apr 2015

    Posts:    828

    My VIN:    10201

    Assistance no longer required unless you know where my dad hid my speedo cable.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •