Radiator fans - anyone know what this one might be?

[FABombjoy]

I would just measure the fan and replace it with another same size unit. Since you're running without a shroud there are numerous universal mounting solutions.

[Timebender]

Sorry, I should have been more clear on that one. I was trying to ask what the face of the fan blades looked like.

If you've got some ramps but the car is too low, best thing to probably do is to jack up your car on the side, and slide the ramps in under the tires.

Question: Same dimensions on radiator as stock?

Good question. I don't know what the stock ones look like, as I bought the car way after it was modified- waaaay after. I do know it fits width wise- maybe a tad wider, but much taller as they cut out part of the trunk liner to get it to fit.

[Timebender]

Wrong ramps for your setup.
Try something with a lower angle, like the race ramps HERE
Their Car Service Ramps come 5 different ways, in two low angles, several heights. At least one style will definitely work on your car.

Good to know!

[Timebender]

I would just measure the fan and replace it with another same size unit. Since you're running without a shroud there are numerous universal mounting solutions.

Agree- kinda was hoping to just pull off the motor and out on another for ease.

[Bitsyncmaster]

I have two new fan motors I bought a long time ago. But without knowing how your fan attaches and the distance of the mounting holes I would not know if those would work for you.

[Timebender]

If I can get under the car I can check for distance. The motor mounts with 4 slotted screws.