FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 5 of 5

Thread: Interior References

  1. #1
    Senior Member
    Join Date:  Jul 2015

    Location:  Tacoma, Wa

    Posts:    2,208

    My VIN:    4877

    Club(s):   (PNDC)

    Interior References

    While I have my interior all stripped out, I figured I'd take some pictures to show some locations of things (as was suggested by someone )
    ..Its not super in depth..more for general locations of things

    The first two show the stripped out interior looking from the passenger side. Can see the bundle of wires running down the center console. They split off and go to the left and right behind the wood pieces on the back. The speaker wires are taped along the front of the wood pieces (yup high tech mounting)

    IntStripped1.jpgIntStripped2.jpg

    Here is looking at the Driver side, you can see the eco tray and transmission eco, above you can see the ring where the driver side rear speaker would be
    Ref-DriverEcus2.jpg

    Closer shot of the Driver side ECU Tray
    Ref-DriverEcus.jpg

    Looking back into the recess behind the driver side...The engine compartment cable and other wires exit from a few holes (Not going to say whats what because Im not certain PO didn't do any shenanigans on mine, but you get the idea here)..make sure you have a skilled small child avaialbe if you need to do anything back there...
    Ref-LeftPontoon.jpg

    This is looking at the passenger side where the fuses and relays are located, again..no speaker...hehe.
    Ref-FusesRelay2.jpg

    Closer shot of the Fuse and Relay tray. The Door lock module is also located here, you can see mine has no cover.
    Ref-FusesRelay.jpg

    And..behind that up in the cave is where the bulkhead connectors in the engine bay are mounted. You can also see the main ground (if you have intermittent electrical issues check that this is tightened)
    Ref-RightPontoon.jpg

    I hope this helps folks new and old to get an idea where some things are.

    Lil trivia.... do you know what parts are held on by velcro?
    Rob Depew
    Tacoma, Wa
    '81 DeLorean 4877 Grey, Auto, 4 wheels
    The Ressurection of 4877......
    Website
    YouTube
    My Patreon

  2. #2
    Senior Member
    Join Date:  May 2014

    Location:  West Islip, NY

    Posts:    243

    My VIN:    16377

    Quote Originally Posted by Lwanmtr View Post

    Lil trivia.... do you know what parts are held on by velcro?
    I believe it is the trim board assembly that is held in place by velcro.

    -Nick Pitello

  3. #3
    Senior Member
    Join Date:  Jul 2015

    Location:  Tacoma, Wa

    Posts:    2,208

    My VIN:    4877

    Club(s):   (PNDC)

    But...which board?
    Rob Depew
    Tacoma, Wa
    '81 DeLorean 4877 Grey, Auto, 4 wheels
    The Ressurection of 4877......
    Website
    YouTube
    My Patreon

  4. #4
    Senior Member
    Join Date:  May 2014

    Location:  West Islip, NY

    Posts:    243

    My VIN:    16377

    Quote Originally Posted by Lwanmtr View Post
    But...which board?
    Part #s 106201 or 110486 depending on the color of the interior. At least that was the one that was put in place with velcro on my car (VIN 1852) when I had it.

    Thanks.

    -Nick Pitello

  5. #5
    Senior Member
    Join Date:  Jul 2015

    Location:  Tacoma, Wa

    Posts:    2,208

    My VIN:    4877

    Club(s):   (PNDC)

    Woulda accepted the the piece below the rear window too...hehe. I was surprised (sorta) to see a part thats held on by velcro...lol
    Rob Depew
    Tacoma, Wa
    '81 DeLorean 4877 Grey, Auto, 4 wheels
    The Ressurection of 4877......
    Website
    YouTube
    My Patreon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •