FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 9 of 9

Thread: Stainless air box

  1. #1
    Member
    Join Date:  Jul 2015

    Location:  Seattle, WA

    Posts:    81

    My VIN:    10499

    Stainless air box

    Purchased from another member awhile back never had a chance to put it on. Cleaning up the garage so time for it to have a new home! It doesn't have the bolts or washers but should be easy to pick up at the hardware store. I had a tinted plexiglass cut for it which cost me around $50 but I haven't installed it. Includes the original clear as well, which shows some wear but should clean up if you wanted to use that instead of the tinted. Asking $225 + $20 for shipping.






  2. #2
    Senior Member
    Join Date:  Jun 2013

    Location:  San Antonio

    Posts:    266

    My VIN:    5628

    Question

    Does it connect to the original air tube?

  3. #3
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,380

    My VIN:    16409

    Message sent.
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  4. #4
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,380

    My VIN:    16409

    Is this still for sale?
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  5. #5
    Senior Member
    Join Date:  Jun 2011

    Posts:    4,807

    My VIN:    3937

    Quote Originally Posted by djdogbone View Post
    Does it connect to the original air tube?
    I've wondered about how this connects too.

    - does it use the original/black plastic lower half of the air filter housing, including the portion where the air filter goes as well as below that for the air intake all the way back to the pontoon?

    - on the other side, where does the smaller diameter fume hose connect to on this unit (the one that plugs into the tip of the old housing with the other end of the hose coming from the oil filler contraption)?


    Sept. 81, auto, black interior

  6. #6
    Member
    Join Date:  Jul 2015

    Location:  Seattle, WA

    Posts:    81

    My VIN:    10499

    Pending sale to Chris.

    It does use the original air tube, and attaches to the lower half of the box that holds the filter. Not sure on the fume hose actually, didn't get that far.

  7. #7
    Junior Member Bongiovi's Avatar
    Join Date:  Apr 2019

    Location:  Miami, FL

    Posts:    7

    My VIN:    1844

    Long shot but did this sell? Thanks!

  8. #8
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,380

    My VIN:    16409

    I was the one that bought it.
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  9. #9
    Junior Member Bongiovi's Avatar
    Join Date:  Apr 2019

    Location:  Miami, FL

    Posts:    7

    My VIN:    1844

    Quote Originally Posted by Chris 16409 View Post
    I was the one that bought it.
    Gotcha, thanks Chris. I have been hunting for one for a while. Think I succeeded actually. How did you like it? Did you end up using the tinted plexi?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •