FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 3 of 3 FirstFirst 1 2 3
Results 21 to 23 of 23

Thread: MISC parts. Cleaning out the closet.....

  1. #21
    Senior Member GS450-Junkie's Avatar
    Join Date:  May 2011

    Location:  Mosinee, Wis.

    Posts:    632

    My VIN:    00778 and Formerly 06770.

    Quote Originally Posted by Ryan King View Post
    You posted this "(2) outer door seals. -N from DMCH $30"

    Wondering if it is this - http://store.delorean.com/p-10340-ou...eal-front.aspx

    111126

    Should be the seal I posted a photo of. Let me know
    I think it is a pair of seals... Which would finish one door. I believe one is part number 111126 and the other is 111128. I will double check tonight

  2. #22
    Ryan > Ruben Ryan King's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA

    Posts:    1,133

    My VIN:    3997

    Quote Originally Posted by GS450-Junkie View Post
    I think it is a pair of seals... Which would finish one door. I believe one is part number 111126 and the other is 111128. I will double check tonight
    Status?
    Living The Dream Since 2005 - VIN#3997

  3. #23
    Senior Member GS450-Junkie's Avatar
    Join Date:  May 2011

    Location:  Mosinee, Wis.

    Posts:    632

    My VIN:    00778 and Formerly 06770.

    Quote Originally Posted by GS450-Junkie View Post
    Here is what's left..... some items have been unclaimed and re-added back to the list.

    N= New
    U= Used
    NOS= New Old Stock
    ?= Condition Unknown

    See pics in Post #1 to appreciate.

    Air Inlet Valve -N with
    I'll throw in the Air Filter Duct -N
    & the Temp Sensor Duct -U
    $75
    (7) Rubber Fuel Lines -U $10
    2 Window Motors -? $20
    Hazard Light -U (Sticky) $20
    Glove box Light -U but excellent condition. $6
    (3) AC Knobs -U $12
    2 Cooling Fans -U but work fine. Mine were replaced with lower current style. $50 for both.
    (2) outer door seals. -N from DMCH $30
    (2) courtesy Lights -U. Work fine. $15 for both.
    Rheostat Bracket -U looks great. $10
    Blower motor resistor. -U some rust on terminal connections, but windings look great. Not sure if this is worth anything to anyone. $5
    (2) Rear Valance. LH & RH -U. Someone painted them black and it is now starting to flake, but should clean up nicely. $40 for both
    Front panel with clock hole. -U. Not perfect, but close. $50
    Label Kit. A Few missing, but mostly still there. $25
    Hood edge protector. -N. This is the long one. 59" $15
    Upper door panel sill carpets. -N Black. These come with the carpet kit, but I ordered brand new upper door panels which already have them installed. $20 for both.
    Jack Handle. -U rough shape, rusty. Free if you pay shipping.
    Heat shield. -U Aluminum backing plate. Shows heat wear. $10.
    Grey Rear trim board. One small crack that could be glued, fixed, etc. $40
    (2) support buffers -N $32
    (1) Roof Seal SS attacher piece. This is the stainless steel bar that the seal gets attached to. These are not offered by DMC. $20
    (2) Door Headliners pieces. -U 1 was recovered, 1 was stripped. Good shape otherwise. $15.
    Fuel pump with baffle system. -U About 9-10 years old. Works good, developed a leak around fuel pump cap. I didn't want to mess with it and replaced it with the new pump/sender combo. $125. OBO
    Outer wipe seal -N $25
    AC Panel Bulbs -N from DMCH. This was part of a kit that they used to sell. Don't know anything about them as I went with Bitsyncmaster's Panel option. $5
    Otterstat switch. -NOS $15
    Wheel Bearings -NOS $55
    Driver's upper door panel. GREY. -U $100. Good shape.
    Passenger side grab handle. GREY -U $65
    Joe Cool -N Never used. The label says last one ever made! $150.
    Stage 1 muffler. Flowmaster. She growls..... -U $25

    Bump

Page 3 of 3 FirstFirst 1 2 3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •