Stainless Steel Upper Loop Eyelet Conversion Shock Mount Kits for QA1 or similar.

[Drive Stainless]

eyeletmount1.jpgeyeletmount2.jpg
Sold as a PAIR. These stainless steel brackets are designed to mount a QA1-style eyelet with a 1/2" through-bolt. The bracket also has a 1/2" hole to attach to the frame/chassis you're using. The brackets are TIG welded followed by grinding the mounting surface flat.

Kit includes:
2x 304 Stainless Steel Bracket
4x 1/2"-20 Grade 8 Steel Bolt
6x 1/2" Grade 8 Washers
4x 1/2"-20 Grade 8 Nyloc Nut
2x Custom Aluminum Bushing to locate the mount in the rear shock tower (NOT SHOWN).


NOTE: The stainless steel bracket can also be supplied UNWELDED (see photo) if you need to adjust the dimensions for a different application or simply prefer to do your own welding.
eyeletpieces.jpg

$49.99

[Drive Stainless]

eyeletmount1.jpgeyeletmount2.jpg

2x Custom Aluminum Bushing to locate the mount in the rear shock tower (NOT SHOWN).

Here is a photo of the billet aluminum bushings that securely locate the attaching bolt in the frame. Two come with each kit.

IMG_4770.jpg


These bracket kits are now included in all Drive Stainless QA1 coil-over suspension kits without any increase in price.