Thanks for the kind words guys!!

Well, I finished the axles..

Before..
image.jpg

I wet sanded them with 320 grit sandpaper and oxalic acid until the rusty residue was gone, then more wet sanding with mineral spirits. I used a twisting motion around the circumference of the axle to preserve the lathe lines...
image.jpg

A paint booth made out of a box.. a brilliant idea for painting these heavy rods that I got from Rich_NYS. I taped the ends and cleaned them with isopropyl alcohol before painting.
image.jpg

2 coats of self etching primer. I just sprayed, turned, and repeated...
image.jpg

4 coats of epoxy paint...
image.jpg

All dried and cured..

image.jpg