FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Cool. And seems like it can hang on walls better too...hehe.
I dont have any experience driving with a good suspension..mine was shot when I got it, so the driving I did do was squeaky and made me really careful...hehe.
Oh, you have a lil dirt under there, might wanna fix that
-
Senior Member
I was just thinking it's time to do some frame clean up lol
-
Senior Member
MVIMG_20190526_160837.jpg
Left rear caliper is sticking. Tried to put it on my new lift . To low . Time to build some ramps
-
Member
Do you think that both an adjustable upper and lower link is necessary to properly align the rear camber, or can you get away with only using an adjustable upper link?
-
Senior Member
Lower link not necessary . Installing an adjustable upper link like I did puts the tire back out to where it's suppose to be and gets the car back to factory alingment specs. Actually better. As the stock setup had variances in production and was shit. I prefer adjustable uppers because it pushes the wheel back out to where it's suppose to be. When you agressively lower and make the lowers adjustable it still has a narrower track then stock. I plan on also doing my lowers. But it's not necessary . If you want a set of uppers or lowers made I can make that happen.
Last edited by powerline84; 06-04-2019 at 07:32 PM.
-
Senior Member
IMG_20190607_151817.jpg
Built some ramps for the D to get on the lift. 150 bucks in materials. Just need to paint them anti slip black . Now I can fix the sticky left rear caliper on the lift. I did a lot of work to this car in a storage unit. Life with a lift is much better lol
-
Senior Member
IMG_20190608_105855.jpgIMG_20190608_122737.jpgIMG_20190608_134208.jpgMVIMG_20190608_141637.jpgIMG_20190608_124731_01_01.jpgIMG_20190608_112522.jpgIMG_20190608_111810.jpgIMG_20190608_110211.jpgIMG_20190608_105905.jpgIMG_20190608_105858.jpgIMG_20190608_094928.jpgIMG_20190608_104206.jpgIMG_20190608_105308.jpgMVIMG_20190608_105701.jpgMVIMG_20190608_160130.jpg
I rebuilt the brakes in my car about 2 years ago now. I have only put 3 to the 5000 miles on the car but my brakes started to get sticky. Origionally when I rebuilt the car I was concerned about corrosion in the lines since the car had sat so long. But I believe after actually driving the car it knocked a bunch of old corrosion in the lines loose. My left rear was locking up after drives so I took both rear calipers off and rebuilt them . You can see the cross referenced jaguar rebuild kit seals from Rock Auto in the pics. I found a massive amount of rust in the calipers pooled up on the line in side . And both seals on both line in sides of the rear calipers were blown. Originally when I rebuilt them I used some brake build lube you can get at parts stores but I didn't like it . It was to thick. It's real easy to pinch the seals on the Pistons in these cars. I have found that using some dot 4 as lube really is the best and easiest method. Put it all back together adjusted the parking brake while I was in there and took it for a drive . Good as new. I am gonna do the front as well another day. I did. Flush the lines again and got just a little bit more crap out. Also replaced the clutch reservoir fluid while I was in there. Total cost. 14 dollars .
-
Cool. I've considered taking my brakes off and doing a refurb on them...but not sure I'd have the skill and dont wanna wreck them.
-
Senior Member
New lugs From Mike MWIMG_20190704_151434.jpgIMG_20190704_151443.jpgIMG_20190704_152017.jpg
Don't impact your lugs.
Hand torqued to 70ftlbs
It's the simple things in live :-)
On to air conditioning
-
Senior Member
IMG_20190706_101451.jpgIMG_20190706_101144.jpgIMG_20190706_102716.jpgIMG_20190706_103152.jpg
Well 2706 is literally going to get a 100% brand new AC system . Because apparently the original owner ran pigs blood through his AC lol
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules