Location: NYS
Posts: 2,511
My VIN: 4519
IMG_1604.jpg
You're nearing the finish line man....great thread!
Last edited by Rich_NYS; 05-02-2017 at 06:22 AM.
Thanks guys!
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
Got home from work early today....had the plan of just putting the intake on and I was dangerously productive lol.20170502_155525.jpg20170502_165247.jpg
Now time for a gym break then back at it tonight. Instal WUR, throttle spool, Fuel lines, harness, vacuum lines etc. Should have alternator bracket from Drive stainless tomorrow hopefully. Josh sent me out hardware for exhaust today, hopefully here thursday . By the way 35 bucks for the machine shop to remove broken cold start bolt and re tap was well worth my time lol
On a side note what the hell are those brackets in the first picture for ?
Last edited by powerline84; 05-02-2017 at 06:42 PM.
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
Ac rear housing bracket and throttle cable bracket for pass valve cover.
www.deloreanindustries.com Every Detail Matters
Last edited by powerline84; 05-02-2017 at 07:57 PM.
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
Pictured on passenger valve cover. (Rice restoration from a few months back)
IMG_3743.jpg
www.deloreanindustries.com Every Detail Matters
Ah ok looks like there clip that attaches to it I don't have. Thanks for the pic !
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
Route without it and install clip after the fact. The cable will stay close to that position. If you need one I can send it down. It is part of the recall kit for cold weather.
www.deloreanindustries.com Every Detail Matters
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap