FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 28

Thread: can I get my binnacle recovered? options?

  1. #1
    Junior Member
    Join Date:  May 2016

    Location:  Richmond Virginia

    Posts:    21

    can I get my binnacle recovered? options?

    I've searched the forums here and the internet and cannot find where anyone recovers binnacles. Looks like there has been talk in recent years that DMC would build reproductions, but I don't see those either. Anyway, mine is cracked pretty bad, what are my options?

  2. #2
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,382

    My VIN:    16409

    Call DMC direct. They can recover it for you. DMC Midwest is a good option. There is an OEM binnacle on eBay currently.

    https://www.ebay.com/itm/132040298361
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  3. #3
    Senior Member
    Join Date:  Sep 2014

    Location:  West Sayville, N.Y.

    Posts:    1,350

    My VIN:    005058 000927

    Club(s):   (AZ-D) (DMA) (DOA) (DCUK)

    We also recover binnacles. You can see them here https://www.pjgrady.com/product/%EF%...uster-housing/
    rob

  4. #4
    Senior Member rickjames8's Avatar
    Join Date:  Jul 2011

    Location:  Northern Virginia, near Washington DC.

    Posts:    214

    My VIN:    5470

    My binnacle is grey, with no leather. It was like that when I bought the car, and it looks quite normal. Is this an aftermarket binnacle, or did someone remove the leather and just leave it bare? Either way, I think it looks really good.

  5. #5
    Senior Member
    Join Date:  May 2011

    Location:  Northern NJ

    Posts:    8,582

    My VIN:    10757 1st place Concourse 1998

    Quote Originally Posted by rickjames8 View Post
    My binnacle is grey, with no leather. It was like that when I bought the car, and it looks quite normal. Is this an aftermarket binnacle, or did someone remove the leather and just leave it bare? Either way, I think it looks really good.
    There was a similar thread not too long ago. Just Dashes can do it but they are not cheap.
    David Teitelbaum

  6. #6
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,385

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    Quote Originally Posted by David T View Post
    There was a similar thread not too long ago. Just Dashes can do it but they are not cheap.
    Just dashes will only do all three (glove box, dash and binnacle) and will charge you a mix fee for the grey. I have no idea how they don't have the code saved on file. They must assume every car is slightly different. Looking at around $3,000 for all three recovered. They actually strip and rebuild, it's not a straight recover.
    Dave

    Here, somewhere.


  7. #7
    Sometimes Owner louielouie2000's Avatar
    Join Date:  May 2011

    Location:  Austin, TX

    Posts:    694

    My VIN:    1710

    Quote Originally Posted by rickjames8 View Post
    My binnacle is grey, with no leather. It was like that when I bought the car, and it looks quite normal. Is this an aftermarket binnacle, or did someone remove the leather and just leave it bare? Either way, I think it looks really good.
    99% of DeLoreans came from the factory with plastic binnacles. (Except a few very early cars that had stitched binnacles and plastic steering wheels). It is only after the binnacles crack due to sunlight and heat exposure that some owners chose to cover their binnacles in leather or Naugahyde. This only became a commonplace fix about 15 years ago when the New Old Stock supply of binnacles was depleted. If you still have an original uncracked plastic binnacle consider yourself fortunate!
    Louie Golden

  8. #8
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,385

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    Quote Originally Posted by louielouie2000 View Post
    If you still have an original uncracked plastic binnacle consider yourself fortunate!
    And protect it.
    Dave

    Here, somewhere.


  9. #9
    Bad Apple Lou and "Boo"'s Avatar
    Join Date:  Sep 2011

    Posts:    531

    My VIN:    5835

    Club(s):   (LINY-DMC) (DCUK)

    Try Russ88ttop over on Fiero.nl (pennocks
    Fiero forum) he repaired and covered mine for about $100 shipped. Awesome Job
    Lou and "Boo"- The man you love to hate.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "Boo" VIN 5835
    Born October 1981 - Brought back to life December 2011
    "Fastest naturally aspirated PRV" Delorean
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "Blue" - 1985 Fiero GT
    3800sc series 2

  10. #10
    Junior Member
    Join Date:  May 2016

    Location:  Richmond Virginia

    Posts:    21

    don't know why I had suck a hard time finding anything... this info helps a lot! Looks like I have some options now. Thanks!

Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •