FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
Originally Posted by
mluder
Sorry about the broken links... I'll try to fix that tonight.
BTW - My initial plan was to cut the gator board so that it would slip over the louvers with them in the closed position. Then the reactor, etc would all be built to sit on top as well. However I found that the deck equipment mostly sits below the level of the louvers - in other words with the louvers in place the stuff would be below and even if you built it to sit on top it would just look wrong. This is why I decided to just build it as accurate as possible and then just display with the louvers open. Of course you can easily remove and re-install the louvers but I opted not to... I spent a lot of time getting my louver latch to actually work and didn't want to undo that.
Cheers
Steve
or the weight on the louver and it cracking? How much does some of this equipment weigh Andy?
--Doug
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules