Interest - Euro-spec / future model headlight trims?

[Lwanmtr]

yeah, once i have a design i'll see what works best...also has to stand up to weather variations...most filaments break down after a while..but cross that bridge later...hehe

[UK Chris P.]

Having recently bought AXI 1699 (currently registered as MGJ 126Y). That also has identical trims to AXI 1697.

I have currently removed them as I'm sorting out new headlight units and wiring behind them.

The car had not been used for 35 years! I've got it up and running now, but still working on the brakes.

[CFI]

Having recently bought AXI 1699 (currently registered as MGJ 126Y). That also has identical trims to AXI 1697.

I have currently removed them as I'm sorting out new headlight units and wiring behind them.

The car had not been used for 35 years! I've got it up and running now, but still working on the brakes.

That’s incredible! Please post some pictures when you have a chance.

[L3V3L1]

Somebody make these, and take my damn money, please!

[Lwanmtr]

Still on my todo list, once Im able to fit my fascia back on and can start measuring, maybe use some of the clay I have to actually mold in there and then scan.

[volkstony]

Whenever these become available I would love a set also. Please put me on the list for them.

[UK Chris P.]

IMG_4208.jpg43635708324_65cddd43d3_b.jpgthumbnail_IMG_4882.jpgthumbnail_IMG_4886.jpg

That’s incredible! Please post some pictures when you have a chance.

I'm afraid I'm hopeless with computers...attachments etc......give me a car and a good toolbox and I'm fine!

Here are a few.

[UK Chris P.]

IMG_4208.jpg43635708324_65cddd43d3_b.jpgthumbnail_IMG_4882.jpgthumbnail_IMG_4886.jpg

I'm afraid I'm hopeless with computers...attachments etc......give me a car and a good toolbox and I'm fine!

Here are a few.

Here is a link to the full story of finding and recommissioning of RHD AXI 1699...... http://www.deloreans.co.uk/forum/sho...light=MGJ+126Y

[Justin Trabue]

I would like a pair of these once they become available. Any updates?

[Lwanmtr]

Im still trying to find some way to get my front running/signal lights to mount to the fascia (the screw holes are stripped, busted, etc). I want to have that on the car before I can rough out a design that will fit. I have some clay I can use to make a mold I can scan into the puter and do some 3d magic.

I already have ideas in my head for a solid version and one that can have led strips placed behind the ribs.

For attaching, I've considered glue (as a non destructive method) or even screws with a backing (which would require removing the fascia, drilling and installing the trim pieced).

I'm in a big project right now, but if I get a chance I'll try n sketch it out.