FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
Originally Posted by
Patrick C
Maybe try hitting it with a heatgun while you try to smooth it out. It might melt the adhesive a bit and allow it to re-stick itself.
+1
Heat will often activate the glue again. Might be safer to use an iron set to low temp. I have a small iron I used to shrink MONOKOTE which is a plastic covering for radio controlled airplanes. That iron has a better temperature setting range.
-
Junior Member
are they replacable?
On my earlier car on the drivers side they are getting beat up. What is that piece called so I can see if DMC has new ones?
-
One of those purists you keep hearing about.
Originally Posted by
n29we
On my earlier car on the drivers side they are getting beat up. What is that piece called so I can see if DMC has new ones?
The "bolsters" (I think thats what they're called) are part of the trim panel, if thats what you're referring to. Drivers side trim panels are extinct. Just buy the caps. They're a good, cheap alternative.
Dave
Here, somewhere.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules