Page 4 of 4 FirstFirst ... 2 3 4
Results 31 to 35 of 35

Thread: Vented Front Brakes - Miata

  1. #31
    Senior Member Josh's Avatar
    Join Date:  Mar 2013

    Location:  SK, Canada

    Posts:    1,502

    My VIN:    11408

    Club(s):   (TXDMC)

    Quote Originally Posted by Drive Stainless View Post
    When do we get to find out which wheel hubs are used?
    1990-2003 Ford Escort REAR hubs

  2. #32
    Senior Member vwdmc16's Avatar
    Join Date:  May 2011

    Location:  sacramento

    Posts:    1,235

    My VIN:    1768

    Club(s):   (NCDMC) (DCUK)

    Ok 500 miles of testing on this set up is complete, they get an A-, more experimentation with grippier pads is what would make it a perfect setup, they are just slightly less powerful in a panic brake situation than the rear brakes, however during a downhill run ,they will far out last the rears staying cool.

  3. #33
    Senior Member vwdmc16's Avatar
    Join Date:  May 2011

    Location:  sacramento

    Posts:    1,235

    My VIN:    1768

    Club(s):   (NCDMC) (DCUK)


  4. #34
    Matt Drive Stainless's Avatar
    Join Date:  Mar 2016

    Location:  Washington D.C.

    Posts:    369

    Quote Originally Posted by vwdmc16 View Post
    Ok 500 miles of testing on this set up is complete, they get an A-, more experimentation with grippier pads is what would make it a perfect setup, they are just slightly less powerful in a panic brake situation than the rear brakes, however during a downhill run ,they will far out last the rears staying cool.
    I think the only thing most people want to know is how the new front setup compares with the oem front setup.

    Why are your comparing the new front with the oem rear? It sounds like you prefer to use a brake master cylinder proportioned to provide more braking to the front calipers? Or are you implicitly stating that this new front setup has less stopping power than the oem front setup?
    New & Improved V3 S/S Alternator Tensioning Bracket - $39.99
    New & Used DeLorean Parts on eBay HERE.
    S/S Upper Alternator Bracket for Saturn/Autozone Alternator - $39.99
    QA1 Coil-Over Suspension Kit - Complete Kit - $1,149.99 w/ FREE SHIPPING
    QA1 "DIY" Coil-Over Suspension Kit - $99.99
    Mirror switch rebuilding service w/ new springs & ball bearings - $49.50
    HEI Performance Ignition Module (Exchange) - $149.99
    Welding services also (all metals)!
    http://www.drivestainless.com

  5. #35
    Senior Member vwdmc16's Avatar
    Join Date:  May 2011

    Location:  sacramento

    Posts:    1,235

    My VIN:    1768

    Club(s):   (NCDMC) (DCUK)

    Im saying the balance is not perfect with these pads and possibly with the Dmc M/C, the rear locks up first if you panic brake since they are smaller piston area than the new larger fronts. They are larger in diameter and pad size than front oem but with the stock dmc M/C they dont get enough fluid to engage evenly with the rear, remember our M/Cs have a built in 63/37 split, with these calipers that is not ideal, improving thr bite with different pads might be the easiest way to dial that in, not saying that will work definately. Im planning on trying out the 50/50 split Saab 900 M/C.


    One if the main reasons to go with these brakes is to get cheaper vented rotors that are easy to get in the US, still working out how to do that on the rear as well, so more rebalancing will be needed then.

Page 4 of 4 FirstFirst ... 2 3 4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •