FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 26

Thread: starter clean up or rebuild

  1. #1
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    516

    My VIN:    3462

    Club(s):   (DOI)

    starter clean up or rebuild

    Just removed the starter as part of my exhaust upgrade. It is absolutely filthy. I am thinking of bringing it to a local starter/alternator shop for a cleanup and possible rebuild. It worked perfectly fine before removal.
    Any advice?
    thanks
    John

  2. #2
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,385

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    For probably the same cost, upgrade to the Remy Eagle starter. It's half the size, half the weight, gives you more room to work with when you're in there and leaves your PR starter as a back up.
    Dave

    Here, somewhere.


  3. #3
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    516

    My VIN:    3462

    Club(s):   (DOI)

    Any modification required?

  4. #4
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,385

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    Nope!
    Dave

    Here, somewhere.


  5. #5
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    516

    My VIN:    3462

    Club(s):   (DOI)

    Sounds like a good way to go then. Is this something I could source locally?

  6. #6
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,385

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    I think i bought mine off Amazon, but I'm sure you could.
    Dave

    Here, somewhere.


  7. #7
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    516

    My VIN:    3462

    Club(s):   (DOI)

    What car/year is it from?

  8. #8
    Senior Member
    Join Date:  Mar 2014

    Location:  Lansing, MI

    Posts:    490

    My VIN:    04194: 5-Speed, Black Int, 79 Peugeot 604 Manifold, 05052: 5-Speed, Gray Int, 78 Peugeot 604 manifol

    Quote Originally Posted by John U View Post
    What car/year is it from?
    1988-1992 Eagle Premier 3.0 V6
    Andrew
    4194 Since 7/98
    5052 Since 7/14

    1972 Buick Riviera
    1974 Bricklin SV-1 177
    1982 AMC Eagle SX/4 (4.2 I6, 4 Speed)
    1983 Pontiac Trans Am (Knight Rider Conversion in progress)
    1985 Oldsmobile Toronado (daily driver)

    Solex carb and antenna television guru.

    "My carbon footprint is bigger than yours!" :-)

  9. #9
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    516

    My VIN:    3462

    Club(s):   (DOI)

    Thanks
    John

  10. #10
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    516

    My VIN:    3462

    Club(s):   (DOI)

    Found one, ordered it. Should be here next week.
    Thanks again!
    Truely one of the most helpful car forums on the interwebs!
    John

Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •