Page 3 of 3 FirstFirst 1 2 3
Results 21 to 26 of 26

Thread: starter clean up or rebuild

  1. #21
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,038

    My VIN:    16409

    Quote Originally Posted by John U View Post
    Ok I definitely see a difference between both my starters now. How do I wire these up?
    John, with the Eagle starter both of the thin gauge wires can be spliced together and attached to the smaller posts. Or the bullet connection can be re-wired with a ring terminal and attached to the small post. When I did mine, I wired both thin gauge wires together, and soldered to larger single wire lead.
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  2. #22
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    500

    My VIN:    3462

    Club(s):   (DOI)

    So just to be clear, three thin wires (red/white, blue/yellow, grey/yellow)to small post, and two thick red wires to large post?

  3. #23
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,038

    My VIN:    16409

    Correct, I forgot there were two wires on that original ring terminal. So all three wires can be combined onto a single ring terminal.
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  4. #24
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    500

    My VIN:    3462

    Club(s):   (DOI)

    Perfect! Thanks!

  5. #25
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,213

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    Turned the key yet John?
    Dave

    Here, somewhere.


  6. #26
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    500

    My VIN:    3462

    Club(s):   (DOI)

    I work slooowww.
    Still have to clean it all, install the starter and dpi exhaust. Busy at work all next week so hopefully by the end of March.

Page 3 of 3 FirstFirst 1 2 3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •