Understood, but I was inquiring as to what Patrick needed as I may have some spare parts laying around.
Sent from my iPhone using Tapatalk
Location: Florida: Pinellas County
Posts: 2,106
My VIN: 5003 Never placed Concourse
Club(s): (DCF)
Understood, but I was inquiring as to what Patrick needed as I may have some spare parts laying around.
Sent from my iPhone using Tapatalk
Last edited by dn010; 08-24-2017 at 04:51 PM.
-----Dan B.
Location: Florida: Pinellas County
Posts: 2,106
My VIN: 5003 Never placed Concourse
Club(s): (DCF)
I do have a complete case and green lens. The lens is very rough with many broken pieces however once it is installed in the console, you cannot see any of the damage. I don't have any pins.
Sent from my iPhone using Tapatalk
-----Dan B.
Hello
I may want one of your clocks. What is price (with shipping to USA)?
Rhode Island?
Thanks
Charlie
Hi,
clocks are still at $75 each (I don't wanna do any rip-off ;-) ).
To the US I would estimate $12 shipping cost with tracking
via regular mail.
Greetings.
...hey r00b, you missed one clock from the first batch,
so I noted you down anyways.
It will take 6-8 weeks from now until you will have the clock, sorry.
Hi,
I started to assemble the clocks... and I figured that the manufacturer of the boards
produced some defects on the PCBs (shortcuts in the wiring and vias not done properly),
which is driving me crazy these days
Luckily I have assembled only a few and tested them before I did all.
So, I am asking you to be patient and give me some more time to receive the new
re-manufactured boards and to assemble the clocks with this new boards.
Sorry.
Thanks for your understanding and patience.