Page 3 of 5 FirstFirst 1 2 3 4 5 LastLast
Results 21 to 30 of 47

Thread: VFD replacement clocks

  1. #21
    Senior Member
    Join Date:  May 2013

    Location:  New York, NY

    Posts:    270

    I would get this but my car doesn't have a clock. So i would need the lens/pins/case for OEM clock to use this.

  2. #22
    Junior Member Yoda's Avatar
    Join Date:  Dec 2015

    Location:  Germany

    Posts:    14

    My VIN:    2328

    yes, papanoel, you are right.
    I designed the clock as replacement for the original case.
    I have to look into it, if I can also design a case/lens and pins,
    that are close to the original, but I don't think that will happen
    in the near future, sorry.

  3. #23
    Young Padawan With The DeLorean kings1527's Avatar
    Join Date:  Jun 2012

    Location:  Oak Park, CA

    Posts:    896

    My VIN:    6575

    Please count me in for one. Let me know when you're all set to go and I'll Paypal you. Thanks again for making a great product for our cars!

    Alex Abdalla
    6575

    Late 1981, Grey 5-speed, 61k miles. Built 11/11/81

    DPNW Toby Fans, DPNW Wings-A-Loft Elite, DMCMW Fan Sequencer, R12 AC, Full LEDs, DMCH Digital Door Lock Module, DPNW Door Lock Actuators, DMCH 140A Alternator, Infinity Kappa 3.5"/5.25", JL XD700 Power Amp, Alpine CDE-HD138BT, DMC CA 8" Sub, Dave McKeen RPM Relay, DMCH Replica Carpet Set, NOS Seat Covers

    A full restoration with step-by-step "what I did" is in progress at www.delorean6575revisited.blogspot.com

  4. #24
    Senior Member MML's Avatar
    Join Date:  Sep 2011

    Location:  County Donegal, Ireland

    Posts:    677

    My VIN:    5436

    Club(s):   (DOA) (DCUK) (DOC-UK)

    I would also be interested in one! I'm tired of losing the correct time every time I disconnect my battery. My display has been misbehaving too.
    - Martin - VIN 5436 -

  5. #25
    Member Bullitt's Avatar
    Join Date:  Sep 2011

    Location:  Sirevåg, Norway

    Posts:    85

    My VIN:    01598

    Club(s):   (DCH)

    Count me in! Let me know when you are ready! 😊
    Svein Apeland

    1981 DMC DeLorean DMC-12, VIN: 01598. Gas flap hood, manual transmission, black interior, wide stripe, galvanized frame, Spax and UK club exhaust.
    x1979 Pontiac Firebird Trans Am
    x1975 Chevrolet El Camino
    x1974 Plymouth Satellite Sebring
    x1966 Lincoln Continental
    x1983 Porsche 944
    x1982 Porsche 944

  6. #26
    Senior Member BABIS's Avatar
    Join Date:  Sep 2012

    Posts:    446

    My VIN:    4502

    I am interested in one!
    VIN 4502

  7. #27
    Member
    Join Date:  Feb 2017

    Location:  Patchogue

    Posts:    38

    My VIN:    03579

    Club(s):   (LINY-DMC) (DCUK)

    Have you begun making these yet? I would be interested.

  8. #28
    Junior Member Yoda's Avatar
    Join Date:  Dec 2015

    Location:  Germany

    Posts:    14

    My VIN:    2328

    Quote Originally Posted by Will F. View Post
    Have you begun making these yet? I would be interested.
    not yet, but started to get parts. Number of interested persons is increasing ;-)

  9. #29
    EFI'd dn010's Avatar
    Join Date:  Jul 2011

    Location:  Florida: Pinellas County

    Posts:    1,199

    My VIN:    5003

    Club(s):   (DCF)

    Quote Originally Posted by Patrick C View Post
    Does anyone sell the lenses for those of us who don’t have the clock already?
    Do you just need the green lens or the whole case?
    -----Dan B.

  10. #30
    Senior Member DavidProehl's Avatar
    Join Date:  May 2011

    Location:  Maple Grove, MN (Minneapolis)

    Posts:    1,186

    My VIN:    05457

    Quote Originally Posted by dn010 View Post
    Do you just need the green lens or the whole case?
    You'll need the case per his below post:

    Quote Originally Posted by Yoda View Post
    Thanks for your interest.
    Here's some information and answers to your questions.

    Yes, you need the OEM case and lid and the hours/minutes
    adjustment pins. I have designed the clock
    to fit into the original case. Since I had to replace the
    clock and the case is still fine in my car.
    You can also re-use the original white plastic connector
    of the OEM clock by sliding out the old female jackets and
    inserting the ones of the new clock in the right order.
    That's the way I did it.

    Yes, it has a backup battery designed in on the PCB.
    (You have to insert a coin cell battery before installing
    into the console.) The clock is working with this coin
    cell (CR1216, CR1220, CR1225), only, since the RTC on board
    requires a back up, if the main power supply "fails".
    Not installing a battery will result in not proper running
    of the clock.
    This will also be the case, if the battery will be empty and
    needs replacement.

    For further information I attached a brief report on how I
    created the clocks.

    If we go on a first come first serve basis the clocks
    will go to:
    1. GS450-Junkie
    2. iflights
    3. powerline84

    Could you guys just write me a PM to clarify on how we
    will do next steps?

    I am sorry for "r00b", but I have no clocks left anymore.
    I would suggest, if the others like them, I can create
    some more (if still needed).

    Hope these answers are helpful.Attachment 49627

    Any further questions or feedback, please let me know.
    David Proehl

Page 3 of 5 FirstFirst 1 2 3 4 5 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •