Understood, but I was inquiring as to what Patrick needed as I may have some spare parts laying around.
Sent from my iPhone using Tapatalk
Location: Florida: Pinellas County
Posts: 2,106
My VIN: 5003 Never placed Concourse
Club(s): (DCF)
Understood, but I was inquiring as to what Patrick needed as I may have some spare parts laying around.
Sent from my iPhone using Tapatalk
Last edited by dn010; 08-24-2017 at 04:51 PM.
-----Dan B.
Location: Maple Grove, MN (Minneapolis)
Posts: 1,423
My VIN: 05457
Ah, sorry!Originally Posted by dn010
David Proehl
Location: Northern Michigan
Posts: 1,147
My VIN: 1880
Club(s): (DCO) (DCUK)
Entire case if I ever decide to put a clock back in. I sold my clock years ago.
Patrick C.
VIN 1880
Location: Florida: Pinellas County
Posts: 2,106
My VIN: 5003 Never placed Concourse
Club(s): (DCF)
I do have a complete case and green lens. The lens is very rough with many broken pieces however once it is installed in the console, you cannot see any of the damage. I don't have any pins.
Sent from my iPhone using Tapatalk
-----Dan B.
Location: Cranston, RI
Posts: 371
My VIN: 4941
Hello
I may want one of your clocks. What is price (with shipping to USA)?
Rhode Island?
Thanks
Charlie
Location: Germany
Posts: 39
My VIN: 2328
Hi,
clocks are still at $75 each (I don't wanna do any rip-off ;-) ).
To the US I would estimate $12 shipping cost with tracking
via regular mail.
Greetings.
Location: Co
Posts: 326
My VIN: 2245
When will they be ready?
Location: Germany
Posts: 39
My VIN: 2328
...hey r00b, you missed one clock from the first batch,
so I noted you down anyways.
It will take 6-8 weeks from now until you will have the clock, sorry.
Location: Co
Posts: 326
My VIN: 2245
okay
Location: Germany
Posts: 39
My VIN: 2328
Hi,
I started to assemble the clocks... and I figured that the manufacturer of the boards
produced some defects on the PCBs (shortcuts in the wiring and vias not done properly),
which is driving me crazy these days
Luckily I have assembled only a few and tested them before I did all.
So, I am asking you to be patient and give me some more time to receive the new
re-manufactured boards and to assemble the clocks with this new boards.
Sorry.
Thanks for your understanding and patience.
Posting Permissions
Reply With Quote