FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
Bae turbo kit parts, stock longblock parts, and more
20170319_135630.jpg20170319_141319.jpg20170319_135545.jpg20170319_135553.jpg
Still working on add and prices but in the mean time if interested just pm me with offer, If stuff doesn't sell here I will probably Ebay it but wanted to offer it to you guys first.
*BAE turbo kit: (400 shipped) what you see is what you get, I make no promises on condition, turbo spins freely but in my opinion all of this stuff needs rebuilt.
-intake pipes
-turbo, waste gate, and exhaust (bolts rusted badly, exhaust is rough, turbo needs rebuilt)
-modified distributor (slight miss shape on head but looks like it still works fine)
-assortment of oil lines..really only good for showing what to recreate if you wanna assemble your own turbo kit.
1st in line for turbo kit: sdg3205, 2nd is DMC-81 still waiting to here from them if they are interested.
-stock valve covers
-stock original alternator (needs rebuilt)
-crank pulley (rusty but can be cleaned up)
-stock crossover exhaust (good shape)
-stock timing chain setup
-stock valley of death y-pipe
-stock valley of death coolant pipe
-stock timing chain cover
-stock delorean lower block piece, windage tray, and oil pan (good for someone doing a conversion needing these pieces)
-stock oil pump and pickup
-left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
-stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
-stock brake master (needs rebuilt)
-stock brake servo (needs rebuilt)
-original door lower ball strut mounts (both in good shape)
-original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
-stock clutch master, needs rebuilt
-stock water pump, needs rebuilt
Last edited by powerline84; 03-19-2017 at 10:01 PM.
-
Senior Member
Still working on add and prices but in the mean time if interested just pm me with offer, If stuff doesn't sell here I will probably Ebay it but wanted to offer it to you guys first.
all from my stock motor, spedo shows 40,666
*BAE turbo kit: (300 shipped) what you see is what you get, I make no promises on condition, turbo spins freely but in my opinion all of this stuff needs rebuilt.
-intake pipes
-turbo, waste gate, and exhaust (bolts rusted badly, exhaust is rough, turbo needs rebuilt)
-modified distributor (slight miss shape on head but looks like it still works fine)
-assortment of oil lines..really only good for showing what to recreate if you wanna assemble your own turbo kit.
waiting on answer from DMC-81 no one else is inline
prices do not include shipping unless specified
-stock valve covers
-70 each or 140 for both
-stock original alternator (needs rebuilt)
-crank pulley (rusty but can be cleaned up)
-stock crossover exhaust (good shape)
-stock timing chain setup
-stock valley of death y-pipe
-50
-stock valley of death coolant pipe
-stock timing chain cover
-100
-stock delorean lower crank case block piece, windage tray, and oil pan (good for someone doing a conversion needing these pieces)
150.00 for crank case, 100 for oil pan, or 300 for the kit
-stock oil pump and pickup
-left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
-400 each
-stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
-stock brake master (needs rebuilt)
-stock brake servo (needs rebuilt)
-original door lower ball strut mounts (both in good shape)
-original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
-stock clutch master, needs rebuilt
-stock water pump, needs rebuilt
Last edited by powerline84; 03-19-2017 at 10:37 PM.
-
Senior Member
i forgot to mention that the oil pan is tapped for the turbo kit and I will include it with the turbo kit. 300 shipped for everything
Last edited by powerline84; 03-19-2017 at 11:24 PM.
-
Senior Member
*BAE turbo kit: (300 shipped) what you see is what you get, I make no promises on condition, turbo spins freely but in my opinion all of this stuff needs rebuilt.
-intake pipes
-turbo, waste gate, and exhaust (bolts rusted badly, exhaust is rough, turbo needs rebuilt)
-modified distributor (slight miss shape on head but looks like it still works fine)
-assortment of oil lines..really only good for showing what to recreate if you wanna assemble your own turbo kit.
-tapped oil pan
still remaining parts:
-stock valve covers
-70 each or 140 for both
-stock original alternator (needs rebuilt)
-crank pulley (rusty but can be cleaned up)
-stock crossover exhaust (good shape)
-stock timing chain setup
-stock valley of death y-pipe
-50
-stock valley of death coolant pipe
-stock timing chain cover
-100
-left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
-400 each
-stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
-stock brake master (needs rebuilt)
-stock brake servo (needs rebuilt)
-original door lower ball strut mounts (both in good shape)
-original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
-stock clutch master, needs rebuilt
-stock water pump, needs rebuilt
-
Senior Member
*BAE turbo kit: (300 shipped) what you see is what you get, I make no promises on condition, turbo spins freely but in my opinion all of this stuff needs rebuilt.
-intake pipes
-turbo, waste gate, and exhaust (bolts rusted badly, exhaust is rough, turbo needs rebuilt)
-modified distributor (slight miss shape on head but looks like it still works fine)
-assortment of oil lines..really only good for showing what to recreate if you wanna assemble your own turbo kit.
(oil pan sold already)
still remaining parts:
-stock valve covers
-70 each or 140 for both
-stock original alternator (needs rebuilt)
-crank pulley (rusty but can be cleaned up)
-stock crossover exhaust (good shape)
-stock timing chain setup
-stock valley of death y-pipe
-50
-stock valley of death coolant pipe
-stock timing chain cover
-100
-left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
-400 each
-stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
-stock brake master (needs rebuilt)
-stock brake servo (needs rebuilt)
-original door lower ball strut mounts (both in good shape)
-original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
-stock clutch master, needs rebuilt
-stock water pump, needs rebuilt
-
Senior Member
I'd be interested in the crossover pipe if you can pressure test it for leaks
-
Senior Member
Originally Posted by
mr_maxime
I'd be interested in the crossover pipe if you can pressure test it for leaks
I have no way of testing that, but it looks to be in good shape. I can say that it was full of oil from the turbo and that didn't leak out till I tipped pipe lol. 50 bucks and you cover shipping and its yours.
Jimmy
-
Senior Member
turbo kit sold.
still remaining parts:
-stock valve covers
-70 each or 140 for both
-stock original alternator (needs rebuilt)
-crank pulley (rusty but can be cleaned up)
-stock crossover exhaust (good shape)
-stock timing chain setup
-stock valley of death y-pipe
-50
-stock valley of death coolant pipe
-stock timing chain cover
-100
-left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
-400 each
-stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
-stock brake master (needs rebuilt)
-stock brake servo (needs rebuilt)
-original door lower ball strut mounts (both in good shape)
-original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
-stock clutch master, needs rebuilt
-stock water pump, needs rebuilt
-
Senior Member
still remaining parts:
-stock valve covers
-70 each or 140 for both
-stock original alternator (needs rebuilt)
-crank pulley (rusty but can be cleaned up)
-stock timing chain setup
-stock valley of death y-pipe
-50
-stock valley of death coolant pipe
-stock timing chain cover
-100
-left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
-400 each
-stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
-stock brake master (needs rebuilt)
-stock brake servo (needs rebuilt)
-original door lower ball strut mounts (both in good shape)
-original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
-
Senior Member
still remaining parts:
-crank pulley (rusty but can be cleaned up)
-stock timing chain setup
-stock valley of death y-pipe
-50
-stock valley of death coolant pipe
-left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
-400 each
-stock clutch,and pressure plate (all need to be rebuilt/surfaced)
-stock brake master (needs rebuilt)
-stock brake servo (needs rebuilt)
-original door lower ball strut mounts (both in good shape)
-original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules