FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 10

Thread: Bae turbo kit parts, stock longblock parts, and more

  1. #1
    Senior Member powerline84's Avatar
    Join Date:  Mar 2015

    Location:  TN

    Posts:    803

    My VIN:    2706

    Bae turbo kit parts, stock longblock parts, and more

    20170319_135630.jpg20170319_141319.jpg20170319_135545.jpg20170319_135553.jpg

    Still working on add and prices but in the mean time if interested just pm me with offer, If stuff doesn't sell here I will probably Ebay it but wanted to offer it to you guys first.

    *BAE turbo kit: (400 shipped) what you see is what you get, I make no promises on condition, turbo spins freely but in my opinion all of this stuff needs rebuilt.
    -intake pipes
    -turbo, waste gate, and exhaust (bolts rusted badly, exhaust is rough, turbo needs rebuilt)
    -modified distributor (slight miss shape on head but looks like it still works fine)
    -assortment of oil lines..really only good for showing what to recreate if you wanna assemble your own turbo kit.
    1st in line for turbo kit: sdg3205, 2nd is DMC-81 still waiting to here from them if they are interested.

    -stock valve covers
    -stock original alternator (needs rebuilt)
    -crank pulley (rusty but can be cleaned up)
    -stock crossover exhaust (good shape)
    -stock timing chain setup
    -stock valley of death y-pipe
    -stock valley of death coolant pipe
    -stock timing chain cover
    -stock delorean lower block piece, windage tray, and oil pan (good for someone doing a conversion needing these pieces)
    -stock oil pump and pickup
    -left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
    -stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
    -stock brake master (needs rebuilt)
    -stock brake servo (needs rebuilt)
    -original door lower ball strut mounts (both in good shape)
    -original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
    -stock clutch master, needs rebuilt
    -stock water pump, needs rebuilt
    Last edited by powerline84; 03-19-2017 at 10:01 PM.

  2. #2
    Senior Member powerline84's Avatar
    Join Date:  Mar 2015

    Location:  TN

    Posts:    803

    My VIN:    2706

    Still working on add and prices but in the mean time if interested just pm me with offer, If stuff doesn't sell here I will probably Ebay it but wanted to offer it to you guys first.
    all from my stock motor, spedo shows 40,666

    *BAE turbo kit: (300 shipped) what you see is what you get, I make no promises on condition, turbo spins freely but in my opinion all of this stuff needs rebuilt.
    -intake pipes
    -turbo, waste gate, and exhaust (bolts rusted badly, exhaust is rough, turbo needs rebuilt)
    -modified distributor (slight miss shape on head but looks like it still works fine)
    -assortment of oil lines..really only good for showing what to recreate if you wanna assemble your own turbo kit.
    waiting on answer from DMC-81 no one else is inline

    prices do not include shipping unless specified

    -stock valve covers
    -70 each or 140 for both
    -stock original alternator (needs rebuilt)
    -crank pulley (rusty but can be cleaned up)
    -stock crossover exhaust (good shape)
    -stock timing chain setup
    -stock valley of death y-pipe
    -50
    -stock valley of death coolant pipe
    -stock timing chain cover
    -100
    -stock delorean lower crank case block piece, windage tray, and oil pan (good for someone doing a conversion needing these pieces)
    150.00 for crank case, 100 for oil pan, or 300 for the kit
    -stock oil pump and pickup
    -left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
    -400 each
    -stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
    -stock brake master (needs rebuilt)
    -stock brake servo (needs rebuilt)
    -original door lower ball strut mounts (both in good shape)
    -original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
    -stock clutch master, needs rebuilt
    -stock water pump, needs rebuilt
    Last edited by powerline84; 03-19-2017 at 10:37 PM.

  3. #3
    Senior Member powerline84's Avatar
    Join Date:  Mar 2015

    Location:  TN

    Posts:    803

    My VIN:    2706

    i forgot to mention that the oil pan is tapped for the turbo kit and I will include it with the turbo kit. 300 shipped for everything
    Last edited by powerline84; 03-19-2017 at 11:24 PM.

  4. #4
    Senior Member powerline84's Avatar
    Join Date:  Mar 2015

    Location:  TN

    Posts:    803

    My VIN:    2706

    *BAE turbo kit: (300 shipped) what you see is what you get, I make no promises on condition, turbo spins freely but in my opinion all of this stuff needs rebuilt.
    -intake pipes
    -turbo, waste gate, and exhaust (bolts rusted badly, exhaust is rough, turbo needs rebuilt)
    -modified distributor (slight miss shape on head but looks like it still works fine)
    -assortment of oil lines..really only good for showing what to recreate if you wanna assemble your own turbo kit.
    -tapped oil pan

    still remaining parts:
    -stock valve covers
    -70 each or 140 for both
    -stock original alternator (needs rebuilt)
    -crank pulley (rusty but can be cleaned up)
    -stock crossover exhaust (good shape)
    -stock timing chain setup
    -stock valley of death y-pipe
    -50
    -stock valley of death coolant pipe
    -stock timing chain cover
    -100
    -left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
    -400 each
    -stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
    -stock brake master (needs rebuilt)
    -stock brake servo (needs rebuilt)
    -original door lower ball strut mounts (both in good shape)
    -original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
    -stock clutch master, needs rebuilt
    -stock water pump, needs rebuilt

  5. #5
    Senior Member powerline84's Avatar
    Join Date:  Mar 2015

    Location:  TN

    Posts:    803

    My VIN:    2706

    *BAE turbo kit: (300 shipped) what you see is what you get, I make no promises on condition, turbo spins freely but in my opinion all of this stuff needs rebuilt.
    -intake pipes
    -turbo, waste gate, and exhaust (bolts rusted badly, exhaust is rough, turbo needs rebuilt)
    -modified distributor (slight miss shape on head but looks like it still works fine)
    -assortment of oil lines..really only good for showing what to recreate if you wanna assemble your own turbo kit.
    (oil pan sold already)
    still remaining parts:
    -stock valve covers
    -70 each or 140 for both
    -stock original alternator (needs rebuilt)
    -crank pulley (rusty but can be cleaned up)
    -stock crossover exhaust (good shape)
    -stock timing chain setup
    -stock valley of death y-pipe
    -50
    -stock valley of death coolant pipe
    -stock timing chain cover
    -100
    -left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
    -400 each
    -stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
    -stock brake master (needs rebuilt)
    -stock brake servo (needs rebuilt)
    -original door lower ball strut mounts (both in good shape)
    -original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
    -stock clutch master, needs rebuilt
    -stock water pump, needs rebuilt

  6. #6
    Senior Member mr_maxime's Avatar
    Join Date:  Mar 2015

    Posts:    1,243

    My VIN:    10201

    I'd be interested in the crossover pipe if you can pressure test it for leaks

  7. #7
    Senior Member powerline84's Avatar
    Join Date:  Mar 2015

    Location:  TN

    Posts:    803

    My VIN:    2706

    Quote Originally Posted by mr_maxime View Post
    I'd be interested in the crossover pipe if you can pressure test it for leaks
    I have no way of testing that, but it looks to be in good shape. I can say that it was full of oil from the turbo and that didn't leak out till I tipped pipe lol. 50 bucks and you cover shipping and its yours.

    Jimmy

  8. #8
    Senior Member powerline84's Avatar
    Join Date:  Mar 2015

    Location:  TN

    Posts:    803

    My VIN:    2706

    turbo kit sold.

    still remaining parts:
    -stock valve covers
    -70 each or 140 for both
    -stock original alternator (needs rebuilt)
    -crank pulley (rusty but can be cleaned up)
    -stock crossover exhaust (good shape)
    -stock timing chain setup
    -stock valley of death y-pipe
    -50
    -stock valley of death coolant pipe
    -stock timing chain cover
    -100
    -left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
    -400 each
    -stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
    -stock brake master (needs rebuilt)
    -stock brake servo (needs rebuilt)
    -original door lower ball strut mounts (both in good shape)
    -original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.
    -stock clutch master, needs rebuilt
    -stock water pump, needs rebuilt

  9. #9
    Senior Member powerline84's Avatar
    Join Date:  Mar 2015

    Location:  TN

    Posts:    803

    My VIN:    2706

    still remaining parts:
    -stock valve covers
    -70 each or 140 for both
    -stock original alternator (needs rebuilt)
    -crank pulley (rusty but can be cleaned up)
    -stock timing chain setup
    -stock valley of death y-pipe
    -50
    -stock valley of death coolant pipe
    -stock timing chain cover
    -100
    -left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
    -400 each
    -stock clutch, flywheel, and pressure plate (all need to be rebuilt/surfaced)
    -stock brake master (needs rebuilt)
    -stock brake servo (needs rebuilt)
    -original door lower ball strut mounts (both in good shape)
    -original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.

  10. #10
    Senior Member powerline84's Avatar
    Join Date:  Mar 2015

    Location:  TN

    Posts:    803

    My VIN:    2706

    still remaining parts:

    -crank pulley (rusty but can be cleaned up)
    -stock timing chain setup
    -stock valley of death y-pipe
    -50
    -stock valley of death coolant pipe
    -left and right cylinder heads with exhaust manifolds and valve-train/cam (loaded...didn't feel like trying to take exhaust manifolds off so buyer gets those to. heads look good, great candidate for rebuilds
    -400 each
    -stock clutch,and pressure plate (all need to be rebuilt/surfaced)
    -stock brake master (needs rebuilt)
    -stock brake servo (needs rebuilt)
    -original door lower ball strut mounts (both in good shape)
    -original drivers side door finisher for t panel attachment...good shape top left corner has a piece of plastic missing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •