Results 1 to 10 of 10

Thread: Cracked fuel sender

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member BABIS's Avatar
    Join Date:  Sep 2012

    Posts:    407

    My VIN:    4502

    Cracked fuel sender

    Hello guys,

    I recently bought a used working fuel sender, but unfortunately the plastic tube now has a crack due to shipping damage:

    IMG_20170319_215754_resized_20170320_125506642.jpg IMG_20170319_215800_resized_20170320_125507920.jpg

    I already have one of the newer fuel sender (actually one from the first release, known to be a little longer) but I prefer the operation of the original units.

    So, is the plastic tube repairable or replaceable? I'd like to hear some feedbacks from who attempted this job before.

    Thanks
    VIN 4502

  2. #2
    Concise Member Jonathan's Avatar
    Join Date:  Jun 2011

    Posts:    3,738

    Do you think the crack will get worse if you install it as is in the tank? The sender will still work with a crack like that, assuming the portion sliding up and down on the inside of the tube doesn't catch the edge of that crack and get stuck.

    You could glue it, but you'd need some sort of glue that is immune to the affects of sitting in gas, which I'm not sure there is one of those.
    One damn minute Admiral...


  3. #3
    Member
    Join Date:  Jun 2016

    Location:  Austin MN

    Posts:    38

    My VIN:    03500

    ow about the 5 second fix. That bonding agent that hardens with the uv light. I'm not sure if it stands up in fuel but maybe Wroth a try. My Walmart sells it of the shelf.

    Just a thought mind you. Dave B

  4. #4
    Senior Member
    Join Date:  Jun 2012

    Location:  Bay Area, CA

    Posts:    160

    Quote Originally Posted by BABIS View Post
    Hello guys,

    I recently bought a used working fuel sender, but unfortunately the plastic tube now has a crack due to shipping damage:

    IMG_20170319_215754_resized_20170320_125506642.jpg IMG_20170319_215800_resized_20170320_125507920.jpg

    I already have one of the newer fuel sender (actually one from the first release, known to be a little longer) but I prefer the operation of the original units.

    So, is the plastic tube repairable or replaceable? I'd like to hear some feedbacks from who attempted this job before.

    Thanks
    Hi Babis,
    I have an extra tube if you want it.
    Feel free to PM me.

  5. #5
    Senior Member
    Join Date:  May 2011

    Location:  Burnsville MN-Moving to Kalispell MT. in June 20111

    Posts:    650

    My VIN:    2691

    fuel sender

    Could a small hose clamp hold it enough to
    make it work?......

  6. #6
    Member Delta DeLorean's Avatar
    Join Date:  Sep 2015

    Location:  The Netherlands

    Posts:    48

    My VIN:    5823

    Club(s):   (DCH)

    Quote Originally Posted by SS Spoiler View Post
    Could a small hose clamp hold it enough to
    make it work?......
    A few tie wraps around it should hold it together.

  7. #7
    Delorean Guru
    Join Date:  May 2011

    Location:  Northern NJ

    Posts:    5,701

    My VIN:    10757

    Club(s):   (DMA)

    Quote Originally Posted by Delta DeLorean View Post
    A few tie wraps around it should hold it together.
    Difficult to do anything like that, it fits tightly into the hole on top of the tank. If the crack doesn't snag the float you should be OK with the crack.
    David Teitelbaum

  8. #8
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    6,266

    My VIN:    03572

    What is the outside dia?

    Heat shrink tubing available up to 4.35"

    http://www.mouser.com/ProductDetail/...odrL9uEg%3d%3d
    Dave M vin 03572
    http://dm-eng.weebly.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •