FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Cigarette lighter
Where can I find a diagram showing the wiring for the lighter? I saw a short video on here once but now that I need it the thing ha gone into hiding. I am going to install a new lighter but all the wires are already off of the old one so what hooks to what? Andy B 03513
-
Senior Member
Purple is the center power. Black is the metal case and red/orange is the light.
-
Senior Member
Lighter Wiring
'Glad someone brought up the lighter and its wiring;
I put the new lighter in, and it works great of course, only it works too good! Actually, what I mean is, the little green courtesy light stays on all the time. I have to disconnect my battery to keep it from running down (fortunately I have a battery quick-disconnect).
Has anyone else experienced the lighter light staying on all the time? Is my wiring Fubar-ed?
Thomas
...
-
Senior Member
Originally Posted by
citizen
'Glad someone brought up the lighter and its wiring;
I put the new lighter in, and it works great of course, only it works too good!
Actually, what I mean is, the little green courtesy light stays on all the time. I have to disconnect my battery to keep it from running down (fortunately I have a battery quick-disconnect).
Has anyone else experienced the lighter light staying on all the time? Is my wiring Fubar-ed?
Thomas
...
Did you swap the purple and black wires?
-
Senior Member
Originally Posted by
Bitsyncmaster
Did you swap the purple and black wires?
Not sure, don't remember exactly, but probably. I'll have to dig-in to it to see for sure, and I'll swap-em back if that's the case.
Thank you sir.
T.
...
-
Originally Posted by
andy blackmon
Where can I find a diagram showing the wiring for the lighter? I saw a short video on here once but now that I need it the thing ha gone into hiding. I am going to install a new lighter but all the wires are already off of the old one so what hooks to what? Andy B 03513
I have a picture if that helps.
FullSizeRender.jpg
-
Senior Member
Here's another view of mine before I changed it out
-
Senior Member
Originally Posted by
Bitsyncmaster
Did you swap the purple and black wires?
Little bit of an old thread, I know, but I wanted to follow up. Dave M. was right, I had swapped the wires as he suggested.
Had some time this Christmas break, so I finally addressed this minor problem. I did NOT have to remove the console. I did loosen the shifter plate to help push up things from underneath. Used the opportunity to do some detailing of the console while I was there too. Amazing how dirty/dusty it can get in corners, cracks and crevasses, like between the switches.
And now that's done. Onward to replacing the spare tire and replacing the side mirrors glass!
...
Thomas
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules