FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 3 of 3

Thread: Want to get new front and rear shocks and springs.

  1. #1
    Junior Member
    Join Date:  Aug 2016

    Posts:    10

    Club(s):   (DCF)

    Want to get new front and rear shocks and springs.

    My shocks and springs (both front and rear) are original and I want to upgrade. However, I dont want to lower my car. The ones from dmc ad PJ grady both lower the front end. Do anyone have any suggestions on good shocks and springs that dont lower the car?

    Thanks,

    Joe

  2. #2
    Senior Member Drive Stainless's Avatar
    Join Date:  Mar 2016

    Posts:    576

    Can you measure from the ground to the top of the wheel arch on the front & rear fenders? This will help me to understand your preferred ride height.

    Measure like this:

    rearheight.jpg

  3. #3
    Senior Member Gregadeth's Avatar
    Join Date:  Jun 2011

    Location:  Los Angeles, CA

    Posts:    396

    My VIN:    6472

    If you want to keep the original ride height but upgrade the ride quality, then keep the original springs and just get new shocks. It's the springs that set the ride height.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •