Hi all
Just in the process of finishing a DPI exhaust install and my wiring bundle coming from my starter is dangerously close to the headers. They are routed toward the front of the car but are still real close. Any tips or tricks?
Thanks
John
Location: Kitchener, Ontario
Posts: 516
My VIN: 3462
Club(s): (DOI)
Hi all
Just in the process of finishing a DPI exhaust install and my wiring bundle coming from my starter is dangerously close to the headers. They are routed toward the front of the car but are still real close. Any tips or tricks?
Thanks
John
Location: Oklahoma
Posts: 107
My VIN: 1058
What about spark plug wire covers. Im not sure what they are made of but they can sat right on a exhaust runner without issue. You could run each power wire through one of those.
Sent from my SM-G920R4 using Tapatalk
Location: Vancouver, BC
Posts: 3,385
My VIN: thirty two 'o five
Club(s): (PNDC)
I had to modify the harness routing. I actually removed one of the engine hoist loops from the top of the block and used to to route the wiring away from the headers.
I believe i also ran the whole harness under the metering unit so it looked cleaner and gave me a little more slack. Let me see if i have any pictures. My car is in storage in another city.
Dave
Here, somewhere.
Location: Vancouver, BC
Posts: 3,385
My VIN: thirty two 'o five
Club(s): (PNDC)
Pretty crummy pics. This was from when i was fixing my head gasket leak. U can see the harness is really close to the block though.
IMG_3271.jpgIMG_3272.jpgIMG_3301.jpgIMG_3302.jpgIMG_3303.jpg
Dave
Here, somewhere.
Location: Kitchener, Ontario
Posts: 516
My VIN: 3462
Club(s): (DOI)
Thanks Dave
The pics really helped. I wrapped the wires with heatshield and routed them so they won't touch the pipe.
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
That routing should keep you out of trouble. Please don't hesitate to contact us directly with any product install questions. [email protected]
www.deloreanindustries.com Every Detail Matters
Location: Oklahoma
Posts: 107
My VIN: 1058
You might twist some wire around the shielding. The cable ties will break over time from the heat.
Sent from my SM-G920R4 using Tapatalk