FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Originally Posted by
Lwanmtr
What'd you have to do to get the door to to open?
I pushed the rod for the front latch to the extreme closed position, wiggled the lock rod and made sure it was all the way in the open position, and then pulled the rod to open the front latch.
Prior to that I soaked everything in wd40.
The cable from the outside door handle has so much friction it will hardly retract at all, so for now it needs a helping hand...
2015 VW e golf
2005 BMW 120i
1987 Porsche 928 S4
1981 Delorean dmc-12
1980 Fiat bertone X1/9
-
filling the valley
Hi all, after spending a few months building a new bathroom in our house, I'm finallly at the end of that project, and restoration will commence.
The valley of my engine is empty, and after some cleaning, I'm ready to start rebuilding it.
In what order do I re-assemble things?
-waterpump
-coolant plumbing
-intake
-injectors
-fuel distributor
-fuel lines
-throttle body
-air metering assembly
-throttle linkage
-spark plugs
-plug wires
-distributor
-clutch slave
-engine wiring harness
that's just me randomly listing the things that come to mind (and what I have spares for ).
Any suggestions for an optimized list for order of assembly?
m
-
-
-
I got the brakes and clutch working, so now I'm eager to get it running.
The car has not run in over 20 years, but the PO claimed it spun easily on the starter.
Should I put atf in the cylinders, to ease things up a little? Or just turn it over dry?
2015 VW e golf
2005 BMW 120i
1987 Porsche 928 S4
1981 Delorean dmc-12
1980 Fiat bertone X1/9
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules