You can use this to help figure out which ones you need.
http://dmctalk.org/showthread.php?61...taining-strips
I still have a few extras I could afford to part with as well.
Posts: 4,807
My VIN: 3937
You can use this to help figure out which ones you need.
http://dmctalk.org/showthread.php?61...taining-strips
I still have a few extras I could afford to part with as well.
Sept. 81, auto, black interior
Location: Vancouver, BC
Posts: 3,385
My VIN: thirty two 'o five
Club(s): (PNDC)
This is what I have. Once Henning (3001) has taken what he needs, you guys can have some too.
IMG_3891.jpg
Dave
Here, somewhere.
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
let me know
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Vancouver, BC
Posts: 3,385
My VIN: thirty two 'o five
Club(s): (PNDC)
DMCH charges roughly $18 USD per strip. I'm thinking more like $10 USD per strip.
Dave
Here, somewhere.
Location: NJ
Posts: 24
My VIN: 1466
Club(s): (DMA)
Location: NYS
Posts: 2,511
My VIN: 4519
I might be interested in a few.
Location: Vancouver, BC
Posts: 3,385
My VIN: thirty two 'o five
Club(s): (PNDC)
I have no problem selling these all off. I have never had a single one fall off my car. I'll let you guys know
Dave
Here, somewhere.
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Hehe...not sure which I need of those..the ones I have on mine I kinda guessed with the ones I did have. I'm sure someone with correct ones can look at the pic I posted to tell.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: sacramento
Posts: 1,415
My VIN: 1768
Club(s): (NCDMC) (DCUK)
Fyi if you are not set on originality there is a much simpler cheaper and lighter alternative. I was missing quite a few of the strips and after buying all the missing strips I was not happy with the fit and look. I ended up Gluing all the mesh screens to the fiberglass with 3M windshield adhesive, layed down a good bead and pressed the grille into the glue. All painted it loks very clean and factory. The lid is much lighter and stiffer than stock could be plus no rattles! 4 years later it still looks great.
Location: Vancouver, BC
Posts: 3,385
My VIN: thirty two 'o five
Club(s): (PNDC)
Here is what I have left:
IMG_3963.jpg
OP, you're entitled to all or none of them as this is your thread. DMCH sells them for almost $18 USD per strip but I'll do $10 USD per strip and throw in the bag of clips with them.
Does that sound good?
Dave
Here, somewhere.