Ahhhh, another nice pic. The mist is clearing.
So are we saying that the LED's wired as in Delorean03 picture above, that they would utilise the delay unit. Because that would be a nice feature.
Location: Torquay, England
Posts: 247
Ahhhh, another nice pic. The mist is clearing.
So are we saying that the LED's wired as in Delorean03 picture above, that they would utilise the delay unit. Because that would be a nice feature.
I loves my grooves!
Location: Leonardtown, MD
Posts: 9,005
My VIN: 03572
If his purple/white wire is the correct one, yes.Originally Posted by 88KPH
Location: Torquay, England
Posts: 247
How do you know its the correct one Dave? Trace it, test it?
I loves my grooves!
Location: Leonardtown, MD
Posts: 9,005
My VIN: 03572
Ohm meter (continuity test) from the purple/white wire at the dome light to the one you want to connect to down on the diodes in drivers foot well.
Location: Torquay, England
Posts: 247
In the picture he's connected on Passenger side.
Does the Ohm test matter if the door/switch is open or closed?
I loves my grooves!
Location: Leonardtown, MD
Posts: 9,005
My VIN: 03572
If you pull the wire off the dome light it would not matter what else is on or off. When ever your doing an ohm meter test you should pull one wire end off to read the resistance of the wire only.
Location: Torquay, England
Posts: 247
I'll look at the weekend.
Just to confirm, Dome light is what we would call the 'interior/courtesy light' above the mirror?
Last edited by 88KPH; 01-08-2016 at 03:53 PM.
I loves my grooves!
Posting Permissions
Reply With Quote
Dave M vin 03572