Looking for everything to do a manual swap. Let me know. Have nothing at the moment so I will update as I acquire parts. Thanks.
Posts: 27
My VIN: 4529
Looking for everything to do a manual swap. Let me know. Have nothing at the moment so I will update as I acquire parts. Thanks.
Last edited by HaleyJoe36; 05-13-2017 at 07:35 PM.
Location: Parker, TX
Posts: 731
My VIN: #1283
Club(s): (SCDC) (DCUK)
Go to.my blog here: deloreanvr6conversion.blogspot.com and check out the May 2015 and June 2015 entries
Sent from my SAMSUNG-SM-G920A using Tapatalk
VR6 engine (367 rwhp/377 ftlb); Type T4 turbo; A/R=0.70/0.68; Air-to-air intercooler, Megasquirt MS3 Pro, Manual tranny w/ HD output shaft; Remote mounted oil filter.
Adjustable dampers and ride height springs from QA1/DriveStainless; SS triangulated LCA brackets, boxed in LCAs, PU bushings, ventilated front brake rotors - all from DMCEU; UCAs with -3 deg camber from Reid Performance; 15" rear rims x 4
http://deloreanvr6conversion.blogspot.com
Posts: 27
My VIN: 4529
Location: Illinois
Posts: 2,440
My VIN: 11408
Club(s): (DMWC) (TXDMC) (DCUK) (DOI)
I have a transmission in my basement that is awaiting to be rebuilt, it is currently in pieces. If you have a hard time finding parts let me know and I can build it up for you.
Alternatively, James (eagle-co94) had a full manual swap kit up for sale. contact him to see if he still has it.
Supercharged 5.3L LS4 + Porsche 6spd
[email protected]
lsdelorean.com
I am not affiliated with Delorean Midwest in anyway.
Posts: 27
My VIN: 4529
I have a manual trans for sale that is complete, but should be torn down and inspected.
Posts: 27
My VIN: 4529
Location: Orlando, Florida
Posts: 2,734
My VIN: 01643
Club(s): (DCF) (DCO) (DCUK)
I have also done this conversion. Don't have any parts, but I documented the process of modifying the frame here:
Auto to Manual Conversion
Posts: 27
My VIN: 4529