Location: Thousand Oaks, CA
Posts: 242
My VIN: 16563
Location: Reedsburg, WI
Posts: 4,026
My VIN: 5180
Club(s): (DMWC) (DCUK)
DENNIS
VIN 5180, Frame 3652, STAGE II, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Good luck
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Thousand Oaks, CA
Posts: 242
My VIN: 16563
Location: Thousand Oaks, CA
Posts: 242
My VIN: 16563
I disconnected the plug but this is the fuel pump connector?
Sent from my SAMSUNG-SM-N920A using Tapatalk
1983 Delorean-auto, black/gray int. 38k miles
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Yep, thats the fuel pump
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: Reedsburg, WI
Posts: 4,026
My VIN: 5180
Club(s): (DMWC) (DCUK)
Now probe the dirty connector hiding under the lip of the opening.
Sent from my iPhone using Tapatalk
DENNIS
VIN 5180, Frame 3652, STAGE II, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.
Location: Thousand Oaks, CA
Posts: 242
My VIN: 16563
Location: Thousand Oaks, CA
Posts: 242
My VIN: 16563
Location: Northern NJ
Posts: 8,579
My VIN: 10757 1st place Concourse 1998
Now that you are at the connector to the fuel pump, check for power AND ground there. You MUST have BOTH for the pump to run. Depending on which one is not present (power or ground) will determine your next steps. To get power you can jumper the RPM relay for testing purposes.
David Teitelbaum