Hi folks,
I need to repair the threads in one of the four bolt holes for my sway bar. Would anyone happen to know the correct thread & pitch?
Thanks!
Location: Rochester, NY
Posts: 2,405
My VIN: 01049
Hi folks,
I need to repair the threads in one of the four bolt holes for my sway bar. Would anyone happen to know the correct thread & pitch?
Thanks!
-Mike
My engine twists my frame.
1981 DeLorean, Carb LS4 swap completed
1999 Corvette, cam/headers/intake manifold, 400 rwhp
2005 Elise, stock
2016 Chevy Cruze
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
M 10 1.50
www.deloreanindustries.com Every Detail Matters
Other option is to use a longer bolt and use a separate nut inside the frame to tighten the bolt into.
Location: Illinois
Posts: 2,440
My VIN: 11408
Club(s): (DMWC) (TXDMC) (DCUK) (DOI)
I drilled out the nuts and installed bolts from the inside out. So when you take off the sway bar there are two sets of "studs" in the frame.
Supercharged 5.3L LS4 + Porsche 6spd
[email protected]
lsdelorean.com
I am not affiliated with Delorean Midwest in anyway.