Fuel system hollow bolts & cold start valve

[DocBrown]

I'm missing 3 hollow bolts for the fuel system. 2 are at the side of fuel distributor, I'm not sure the size, one is a double, perhaps 14mm, a smaller single to the right of it. I am also missing the cold start valve and the hollow bolt to connect the line to the top.

If anyone has some spares, or can advise the size of these, I would greatly appreciate it.

I am trying to reconnect the fuel system and test this motor out.
image.jpgimage.jpg

[DocBrown]

I'm missing 3 hollow bolts for the fuel system. 2 are at the side of fuel distributor, I'm not sure the size, one is a double, perhaps 14mm, a smaller single to the right of it. I am also missing the cold start valve and the hollow bolt to connect the line to the top.

If anyone has some spares, or can advise the size of these, I would greatly appreciate it.

I am trying to reconnect the fuel system and test this motor out.
image.jpgimage.jpg

Ok we figured it out. I need the 12mm double hollow banjo bolt that goes to fuel dist, also need an 8mm hollow bolt.

[bueller]

You might try your local Volvo dealer. I had a couple of the smaller banjo bolts break when doing my fuel line upgrades and the local Volvo parts Dept was able to help me out.

[Lwanmtr]

Try one of the DMC vendors. They most likely have the correct parts

[sdg3205]

Try one of the DMC vendors. They most likely have the correct parts

+1. Not the kinds of parts buying used is going to be worth the effort.

DMC

[DMC5180]

the double banjo bolt is NLA from DMCH.

But this should do the job.
https://www.belmetric.com/double-ban...1ub55hl3vkkio2

If you want to spruce things up a bit you do the SS bolts from www.deloreango.com

https://www.deloreango.com/us/comple...-bolt-kit.html

You can select bolts individually as required too.


Sent from my iPhone using Tapatalk