What is DMCH now using for the performance suspension kit? Spax?
Location: Rockwall, Tx
Posts: 98
My VIN: 10686
What is DMCH now using for the performance suspension kit? Spax?
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
the suspension kit on their site is Eibach
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Posts: 4,764
My VIN: Banged your VIN'S mom
I have been running the performance suspension kit for years. The spring kit is Eibach, the shocks are not. That's all I know.
Posts: 77
I was thinking about putting the eibach springs only, with my standard shocks, I want to get rid of the high nose look. Does the standard shocks go well with lowered springs?
Fernando Silotto. Sao Paulo - Brazil
Delorean Vin 3772
Location: Florida
Posts: 2,371
My VIN: <2000
Club(s): (DCF)
The shocks were mentioned in this thread ( specifically post 18 ). http://dmctalk.org/showthread.php?14...with-age/page2
Dana
1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
1985 Chevrolet Corvette, Z51, 4+3 manual
2006 Dodge Magnum R/T (D/D)
2010 Camaro SS (Transformers Edition)
Location: Los Angeles, CA
Posts: 396
My VIN: 6472
The springs are Eibach, the shocks are AVO.
The springs will lower the car, but the advantage with aftermarket shocks is you can adjust the firmness of the shocks, and also the ride height on the rear. None of which can be done with the original shocks.Originally Posted by madstudios
Posting Permissions
Reply With Quote